USB Card Skimmer Magnetic Stripe Card Reader Magnetic Card Reader
for Supermarket or Shops
Directions for use
Magnetic stripe card reader and writer machine connected to PC (terminal) right after, can be the following:
1, set communication parameters According to the reading and writing at the bottom of the machine label instructions will set the switch to the right position, consistent with the superordination machine parameters (terminal).
2, electricity self-inspection Electricity or received a hard reset after the command, red, yellow, green light is shining at the same time, three seconds after all out, with a buzzer, self-checking by, otherwise the self-check error and long bright red light.
3, read operation series machine receives commands to read a magnetic stripe card reader and writer, after the green light is lit, the operator is the trademark, magnetic stripe for the body, the magnetic card or the passbook from right to left across the slot at a constant speed.If read correctly the green light, a buzzer rang;If not correct, the green light, the
red light is lit, buzzer rang three times.
Type of Product | Reading and Writing Card Reader |
Swipe speed | 10-120cm/s |
Read and writing speed: | iso7811-7815/ibm/ibm4777 |
Recording density | Track 1: 210bpi |
Record characters | Track 1: 76 characters |
Export port | USB |
Head Life | >600000 times |
Power | DC+5v 280mA |
Work Environment | |
Temperature | 0℃~ 40℃ |
Humidity | 10 ~ 85%RH |