Hot Selling New Bluetooth Wireless Handheld Portable
2D Barcode Scanner Factory
Main Features:
- Three scanning modes, including continuous scan mode, manual mode, auto off mode
- Long working time with a full single charge
- The sound size of prompt tone can be adjusted by setting the size of the bar code
- Built-in 1000mAh rechargeable lithium-ion battery supplies 24hrs working time and it can be fully recharged for 4hrs, standby time up to 36 hours
- HID / SPP Mode and scan switch
- Built-in 512KB memory storage mode, it can store more than ten thousand pieces of information
- Built-in Bluetooth disconnected 2KB memory as temporary data, it can store approximately 110 pieces of data when using
- It can be set up by reading the bar code to change the data transmission format, edit the data and bar code type
Specification | |||||||||||||
Mechanical | Length:57.8mm, Width: 42.3mm, Height:16.4mm | ||||||||||||
Weight | 40g | ||||||||||||
Electrical | Power: DC5V Typical: 75mA DC5V | ||||||||||||
CPU | 32bit ARM CPU | ||||||||||||
Data storage | 100KB for offline mode: 6000 15 bytes barcodes(Other flash is optional). | ||||||||||||
Working mode | Bluetooth mode, USB mode, offline mode and RS232 mode(optional) | ||||||||||||
Scan mode | Good-read off, Momentary, Alternate, Continuous, Host | ||||||||||||
Artificial light immunity | 100,000 lux | ||||||||||||
Scanner performance | Sensor Type: CMOS Scanner Rate: 100 times Scanner Angle: ±50°,±65°,±35°(skew, pitch, Roll) Contrast: >20% Decode Speed: 100 times per second | ||||||||||||
Battery power | Internal Battery: Changeable 600mAh Li-ion Battery, Standby 5 days, working time after full charge with good decode as below:
Charge Time: About 1.5hours.
| ||||||||||||
Barcode Type | UPC-A, UPC-E, EAN-13, EAN-8, ISBN/ISSN, Code 39, Code 39 full ASCII,Code 32, Trioptic Code 39, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5,Codabar (NW7), Code 128, Code 93, Code 11(USD-8), MSI/Plessey,UK/Plessey, UCC/EAN 128, China Post, GS1 DataBar (formerly RSS) variants |