120dB 2000Hz Frequency 20MHz DAC AVG DGS AWS B Scan Auto Calibration APP Ultrasonic Metal Detector​

Top features

★ User friendly operation such as calibration, making curves, etc.

★ All curve tools included: DAC, AVG, TCG AWS, etc.

★ Pulse repeatition frequency: 10-2000Hz precise adjust, high speed scan, no miss out.

★ High signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions.

★ 12-digit AD, high speed sampling leads to better echo diagram with all details. Sensitive and can detect even tiny flaws.

★ Customer can use probe frequency 20M .

★ IP65 protection standard. protective rubber casing. damping support makes it stands in any angle.

★ Battery works continuouly 15 hours after one charge.

Main interface

Testing Report

Menu

Making DAC

Coded echo

Standards optional

AVG SET

Color Bscan (optional)

Report list APP software (optional)

Specifications

Testing Range:0-10000 mm ,at steel velocity

Material Velocity Range:100～20000 m/s

Pulse Repetition Frequency:10-2000Hz

Dynamic Range:≥38dB

Linearity: Horizontal: +/-0.2%, Vertical: 2.0%(Horizontal:+/-0.2% FSW Vertical: 0.25% FSH )

Resolving Power:>40dB (5P14)

Sensitivity Leavings:>68dB

Reject (suppression): 0 to 80% full screen height

500 independence setup, any criterion can be input freely, we can work in the scene without test block；

Large Memory: 1000 A graph

Testing Modes: Pulse echo, dual element and thru-transmission

Probes Optional Types: Single Straight, Single Angle, Dual Straight, Dual Angle,Through,Creeping,Surface

Gate Monitors: Two independent gates controllable over entire sweep range

Display Units: Inch or millimeter

Power Requirements: AC Mains 100-240 VAC, 50-60 Hz

Display Delay: -20 to 3400 µs

Probe Delay/Zero Offset : 0 to 99.99µs

Battery:Internal rechargeable Li-ion battery pack rated 7.2V at 8000 mAh

Battery Working Time:15 hours nominal operating time depending on display brightness

Battery Charging Time:4 hours typical recharge time

Size:H×W×D(mm):250×165×55 (mm)

Weight :1.2kg

Operating Temperature: -10℃ to 50℃

Storage Temperature: -30℃ to 50℃

Pulse Energy: 70V,100V,200V, 300V, 400V, 500V selectable

Rectification: Positive half wave, negative half wave, full wave, RF System

Bandwidth (amplifier bandpass ): 0.2 to 25 MHz

Gate Monitors: Two independent gates controllable over entire sweep range

Sensitivity: 120 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB.

Transducer Connections: BNC or LEMO optional

Functions

Automaticly display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,ф)

Flaw sizing: Automatic flaw sizing using AVG or DAC/TCG, speeds reporting of defect acceptance or rejection

Automatic calibration of transducer: Zero-point, Angles, Front edge and material Velocity . ( V2 block and two holes )

Easy to make and use DAC/TCG and AVG to evaluate the echo, the curve can be modified and compensated

Connecting U-Disk memory,the unit can get unlimited memory

15 international standards built in the unit

Blue tooth connection to mobile device to generate and print detection reports on-site.　AWS D1.1

Curved Surface Correction feature

Can test crack height

Magnify gate:spreading of the gate range over the entire screen width

Auto-gain function

Envelope: Simultaneous display of live A-scan at 70 Hz update rate and envelope of A-scan display

Peak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results

Scan Freeze function:Display freeze holds waveform and sound path data

Alarm:Beep and LED light alarm

Real Time Clock

Fill echo

Capture mark

Echo color within the Gate

Standard Package
Portable Ultrasonic Flaw Detector FD560 1pc
Straight Beam Transducer (2.5 MHz, Φ20) 1pc
Angle Beam Transducer (4 MHz, 8 mm×9 mm, 60°) 1pc
Connect Cable for the transducer (BNC-LEMO 00,or optional LEMO 01-LEMO 00) 1pc
Rechargeable Li-Ion Battery Package, 8 amp hour 1pc
Power supply/charger unit 1pc
Operating Manual in English 1pc

Optional Accessories
Straight probe (5MHZ-ф20)
Straight probe (2.5MHZ-ф20)
Straight probe (2.25MHZ-ф20)
Straight probe (1MHZ-ф20)
Angle probe (4MHZ-45degree, 8*9mm)
Angle probe (4MHZ-60degree, 8*9mm)
Angle probe (4MHZ-70degree, 8*9mm)
Angle probe (4MHZ-80degree, 8*9mm)
Angle probe (2MHZ-45degree, 8*9mm)
Angle probe (2MHZ-60degree, 8*9mm)
Angle probe (2MHZ-70degree, 8*9mm)
Angle probe (2MHZ-80degree, 8*9mm)
Probe T/R (5MHz-ф20mm, focus 15mm)
Probe T/R (2.5MHz-ф20mm, focus 15mm)
Connection cable to probe (BNC-BNC)
Connection cable to probe (BNC-Lemo 00)
Connection cable to probe (Lemo 01-BNC)
Connection cable to probe (Lemo 01-Lemo 00)
Lithium ion battery
Power adapter (4A/9V)
Power Cable
Leather case
Test block V1
Test block V2
Test blocks DAC, ASME etc.

App Software
Strap

Blue tooth