Precision Metal Stamping Parts Polished Stainless Steel Motor Support

Stainless steel support stamping parts are stamped a plate socket and bended a clip in strip , bended upper section to fix or secure support stamping part on object and supporting socket with flat panel is used to support something of motor .

Material

Support stamping parts are made of high tensile strength stainless steel 18-8 that with good performance or properties .

Mechanical property of support stamping parts

Thermal performance of support stamping parts

Electrical performance of support stamping parts

Dimensions

Length : 25 mm

Width : 25 mm

Height : 15 mm

Thickness : 0.8 mm

Chamfer : 0.5 x 45°

Note : we accept customized sizes from 0.5 mm to 5 m for different designs .

Tolerance

+/-0.1 mm for normal sizes , and refer to following tolerances standard for unspecified sizes .

Characteristics

Stainless steel support stamping parts for motor have high tensile strength and good performance to meet continuous high-load working .

◆ High tensile strength

Tensile strength is up to 535 σb (MPa) and more higher after heat treatment .

◆ Perfect elongation

50 δ5 (%) to ensure support stamping parts have enough elongation under heavy load and pressure . .

◆ Hard material

Support stamping parts are made of stainless steel 18-8 that hardness is HRC 72 or so .

◆ Resistance to corrosion

Stainless steel 18-8 with good performance on anti-corrosion by itself . normally , not to be rusted in 5 years inside conditions .

◆ Non-magnet

Its nearly no magnet for stainless steel 18-8 support stamping parts .

Finish

Polishing for support stamping parts