30 x 15mm Plastic Injection Moulding Parts Fixed Seat For Communication Device

.

With good self-lubricant performance POM plastic injection molded fixed seat for communication device accessory , two stepped holes in body and a hex socket above holes for locating hex bar or rod , a pillar with groove and clipped snap ; four sockets in the front of body , two clamp panel are placed on top of socket .

Material for Plastic Injection Molded Fixed Seat Part

They are made of POM with high tensile strength and hard surface for wear resistance .

Sizes for Plastic Injection Molded Fixed Seat Part

All sizes are millimeter

Tolerances for Plastic Injection Molded Fixed Seat Part

Physical Performance for Plastic Injection Molded Fixed Seat Part

Mechanical Property for Plastic Injection Molded Fixed Seat Part

Thermal Performance for Plastic Injection Molded Fixed Seat Part

Features for Plastic Injection Molded Fixed Seat Part

Good self-lubricant

Resistant high temperature

Normally , the part can be operated smoothly at temperature 150℃ and thermal deformed temperature is up to 250℃ when parts with glass fiber .

Perfect elongation

Elongation at break is 2.2% according to ISO 527 testing method .

Corrosion resistance

Good insulation

Specific volume resistance is 1.83×1015 and resistance to high breakdown voltage support part to be good insulated .

Resistant impact

60 – 80 KJ/M2 normally .

Resistant fire

Generally , the fire resistance is UL94V-2 and UL64V-0 for special parts .

Resistance to low temperature

Parts can be workable at -30℃

Environment friendly

Parts meet RoHS or REACH environmental production standard .

RFQs

What attentions for POM plastic injection molded fixed seat parts ?

1 , easy to be cracked and pulverized outside long-term .

2 ,Don’t put parts under temperature over 100℃

3 , Don’t put parts under circumstance with alkali and oxidant .

Do you have any suggestions for instead material for POM ?

There are many different plastic materials like PA , PC ,PMMA ,PP and ABS ,they are different on performances , we can give you professional advices according to your requirements .

How many days for a new developing mold ?

Normally one week .

How many days for delivery ?

Different quantity and requests different days .