Swivel Flange Adapter Flange Reducing Flange Anchor Flange Incoloy 800HT

1. The Swivel Flanges permits 360° rotation of an outer ring around a hub, to allow easy alignment of bolt holes when attaching to a mating standard flange. For subsea applications, this capability is important when only a single diver is available to align and make up the flange connection.

The outer ring Flange of the Swivel Ring Flange assembly is held in position by a retainer ring that freely rotates around the inner weld-neck hub for quickly positioning the bolt holes of the two joining Flanges.

2. Reducing flanges are designed for when there is a change in the pipe size. The predominate flange (dimensions) matching the larger pipe size (NPT) but having a smaller bore matching the smaller pipe size (NPT). These flanges normally come in blind, slip-on, threaded and weld neck flanges.

They are available in all pressure classes and provide a good alternative to connecting two different sizes of pipe. This type of flange should not be used if an abrupt transition would create unwanted turbulence, such as at a pump.

Size: 1/2” to 60”, DN 12mm to DN 1500mm

Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250

Facing: RF / RTJ

3. Anchor flanges are important elements in many thrust-control systems, especially those protecting pipeline pumping stations. Welded into the line and encased in concrete, they immobilize the pipe at predetermined locations and transfer built-up stresses to external structures. For example, in cross-county pipelines end forces of considerable magnitude are generated by internal pressure and temperature changes. A 24" O.D. x 0.594" wall pipe in a pipeline operating at 1100 psi and subjected to a 90° rise in metal temperature, for example, will develop total thrust of 1,000,000 lbs. Unless these forces are properly controlled, they can damage pumps, valves and other close-tolerance equipment. Anchor Flanges may be used to secure subsea piping and risers to platform structures.

4. Incoloy 800 Physical Properties

Density: 0.27 lbs/in³, 7.94.g/cm³

Specific Heat, Btu/lb•°F, J/kg•°C:

32-212°F (0-100°C): 0.11 (460)

Mean Coefficient of Thermal Expansion: in/in/°F (mm/m/°C) 70- 212°F (20- 100°C)– 7.9 x 10-6 (14.2)

Thermal Conductivity: BTU/h-ft-°F (W/m-°K): 70°F (21°C): 6.7 (11.6)

Modulus of Elasticity: ksi (MPa) 28.5 x 10³ (196.5 x 10³) in tension

Permeability at 70°F (21°C) H= 200 Oersted : Annealed : 1.014

Melting Point: 2525°F (1385°C)

Incoloy 800 Strength Properties

Ultimate Tensile Strength: 75 KSI min (420 MPa min)

Yield Strength (0.2% offset): 30 KSI (gauges ≥ 0.020 inches)

Elongation: 30% min

Hardness: Rb 84 nom

Incoloy 800, 800H & 800HT Chemistry and Specifications

Incoloy 800, 800H & 800HT Specifications: UNS N08800/ N08810 / N08811 (800, 800H, 800HT), ASTM B408, ASME SB408, ASTM B564/ASME SB564, EN 10204-3.1, Werkstoff 1.4876 (800), Werkstoff 1.4876 H and 1.4958 (800H), Werkstoff 1.4876 HT and 1.4959 (800HT)

Incoloy 800 Mechanical Properties