240-2400 Mm/Min Automatic H Beam Production Line Steel Fabrication Welding Machine 150-2000mm

Horizontal Line Main Features

1.Only need to spot welding at two terminals of the work-piece (without the full-length spot welding of whole work-piece), then it can enter the next step-- weld. The assembly welding machine will weld the three "loose plates" after positioning, greatly increase the efficiency.

2.With the horizontal placement of work-piece (web horizontal, flange vertical) and the welding mode of work-piece moving, two seams can be welded simultaneously to reduce the distortion of work-piece caused by welding heat.

3. Equipting AOTAI welding(Lincoln is avaiable) power source to achieve single-arc double-wire welding, using 1.6mm welding wire, welding speed can be up to 1.2 m / min, good weld formation, beautiful appearance

4. Due to the automation degree of the production line is much higher than that of the traditional production line, it can reduce the labor intensity of workers and reduce the number of operators. The production line only needs 4-5 operators to produce normally.

5. available for H Beam with variable cross section ≤ 8 °

Double cantilever gantry welding machine is the most popular machine developed by our company. Mainly complete the welding assembly work of H-shaped steel and Box-shaped steel. The double cantilever submerged arc welding machine improves the welding efficiency. According to the requirements of the beam, you can choose a single arc single wire or a double arc double wire submerged arc welding machine.

The sub-merge arc welding power setup device is on the gantry gate, and moves along. In this way, the control cable and welding cable are short, and response fast, with small pressure drop and stable welding currency.

Welding control and gate frame control are integrated and easy to operate. The cable in welding arm is in the form of imported drag chain, neat and safe.

Main Features:
1.Gantry gate unit: Gantry gate,travel device,lateral sliding device,feeding wire wheel and pipe
accessories;
2.Welding arm and carriage: Welding arm,motor transmission device,move device and accessories (2 sets each);
3.Arc guide device: Welding gun,mechanical adjusting unit and feeding wire machine (2 sets each);
4.Flux recovery system:100kg flux recovery machine,separate material barrel,flux hopper,flux recoveryand transmission pipe;
5.Electric control system: Electric control cabinet,AC frequency converter,operation box,lighting
warning light;
6.Pipe and wire system: Welding machine power wire,control wire,welding cable,gantry gate control
cable,air source pipe,suspending sliding frame;
7.Welding system: MZ-1000/DC-1000 submerge arc welding machine*2sets;
8.Welding Qty: 2pcs H beam once completed.