Adjustable Speed Frequency Control Φ1500mm Pipe Surface Cleaning Shot Blasting Machine

Pipe Surface Cleaning Shot Blasting Machine is mainly used for a variety of diameter pipe wall surface cleaning, it can in the original state of the steel surface impose a strong shot blasting, remove the rust on its rust layer and its oxide, so that a certain degree of uniformity of finish Of the metal glossy surface, in order to remove stress, improve the steel surface coating quality and corrosion resistance.

In order to ensure the cleaning effect of the workpiece, and the use of the main room roller table was ordered, especially in the main room roller table with high chromium wear-resistant sheath, so you can extend the use of roller table was ordered several times.

Technical parameter

1, Workpiece size

2, Roller conveyor system (adjustable speed)

(1) Enter the roller table

(2) the output roller

3, shot blasting machine (frequency control)

4, hoist

5, the separator

6, the vertical screw conveyor

7, horizontal screw conveyor

8, dust removal system

Dust collector

Centrifugal Fan

9, the whole machine power: about 55kw

10, the total amount of ventilation: 12500m3 / h

11, quality standards

12, equipment noise (operating area): ≤ 95Db

Working conditions:

The altitude is not more than 1000m;

Ambient air temperature range: -10 DEG C to +40 c.;

Air relative humidity: when the daily average temperature is not more than 25 degrees centigrade, the average relative humidity is 90% in the wettest month;

Grid voltage fluctuation: within + 10% (when the grid frequency is rated)

The grid frequency fluctuation: less than 1% (when the grid voltage rated value).

2, working environment

The equipment shall be placed in an explosive or corrosive industrial gas that does not seriously endanger or affect the normal use of the equipment Steam, salt fog and chemical deposits, and should be away from severe vibration and turbulence occasions