Lvds Ttl Tcon Board Work For 50pin AT050TN22, AT056TN52 Lcd

Every LCD/LED panel has its T-CON (Logic Board) either connected with a panel with COFs or separately installed. It is also called panel PC8. Panel PCB receives all the signals from the mainboard and gives data to the panel in the form of voltage and signals to make a picture display. A short program is stored at the panel PCB, Scaler Board, or T•Con for the operation of this PG. Sometimes this firmware also called panel
Bios is corrupt due to some reasons and may cause the panel to mute conditions results no picture or display. So, the panel bios or panel PCB firmware is very important, and in this post, you will find here panel PC firmware and dump files (backup files) collection for the technician's support. All of you can download all the panel firmware or panel software easily without any cost.

1. Generation of T-con

The gold finger material Polymide is thin and flexible. Other areas material CCL FR4.

2 . Specifications:

• Flexibility. Flexible circuits can be bent, folded, and even creased to fit the end application, giving the designer the ability to have the circuitry fit the device, rather than the end device being built around the electronics and circuit boards. Flexible circuits are ideal for wearable electronics, for example.
• Connectivity. Flexible circuits provide greater connectivity between other circuit boards, electronic components and the user interface in electronic packaging. They can even provide connectivity in dynamic flex applications where the flexible circuit needs to flex continuously over the life of the device, so they are used extensively in laptop computers, foldable electronics, and display connectivity.
• Reduced weight. A lower-weight circuit board results in a lighter end product, which is essential in today’s electronics market where small, lightweight devices are preferred by electronic device designers and consumers. Flexible circuits are ideal for unmanned vehicles and drones, due to their very light weight.