HDMI 2 X 8 , 3D , 4K X 2K , 60HZ , Switch/Splitter

Features

1. Extend the transmission distance and improve transmission signal;

2. Compatible with DVI by using HDMI to DVI adapter;

3. Metal casing design and overall shielding without signal interference.

4. Fully HDMI 2.0 specification compliant. It is applicable to source device and high definition display device ,such as DVD and HDTV which have HDMI Ports or digital ports and are compliant with HDCP1.1/1.2/1.4/2.2 protocol;

5. Support video format up to 4k2k@60Hz with 24bit RGB/YcbCR 4:4:4/YCBCR4:4:4,and up to

4k2k@60Hz with 12bit YCBCR 4:4:4;

6. Audio formats DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3 and DSD;

Panel Introduction

SPDIF ---------------------------------------Digital Audio Output Port

R/L ------------------------------------------Analog Audio Output Port

IR --------------------------------------------------------IR Receiver Port

Out1-8--------------------------------------------------Output1-8 Status

In1-2-----------------------------------------------------------Input Status

Power ------------------------------------------------------Power Status

Select ------------------------------------------------Input select button

ON/OFF ----------------------------------------------------Power button

HDMI Input1-2-----------------------------------HDMI Input1-2 Port

HDMI Output1-4------------------------------HDMI Output1-4 Port

DC5V---------------------------------------------DC Power Input Port

Connection diagram

1. Connect the HDMI cable between signal source and input port of Splitter.

2. Connect the HDMI cable between output port of Splitter and HDTV.

3. Connect splitter and power adapter.

4. Open the signal source and the power of HDTV, then it works.

5. Use the remote control or toggle button to select the source you want.