HDMI 2 x 8 , 3D , 4K x 2K , Switch/Splitter

Introduction

HDMI Splitter is a product which can distribute HDMI signal without loss to one or more high definition display device such as HDTV. It can optimize your home theatre system to the best effect.

HDMI signal is distributed from source device such as DVD, Satellite Receiver, Set-Top Box, DV Camera, A/V Receiver and other HDMI enabled device to high definition display device such as HDTV and HDMI Flat panel Display.

1. Fully HDMI 1.4 specification compliant. It is applicable to source device and high definition display device ,such as DVD and HDTV which have HDMI Ports or digital ports and are compliant with HDCP protocol.

2. Support high resolutions up to including 480i/p,576i/p,720i/p,1080i/p and 4Kx2K@25/30Hz

3. Support 30/36 dark, extended color space support, including:SYCC601,Adobe RGB,AdobeYCC601

4. Blu-ray DVD 24/50/60fs/HD-DVD/xvYCC.

5. Audio formats DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3 and DSD.

6. Extend the transmission distance and improve transmission signal.

Panel Introduction

IR Ext ---------------------------------IR Extension Port

IR ----------------------------------------------IR Receiver

Out1-8--------------------------------------Output Status

In1-2-------------------------------------------Input Status

Select ----------------------------------Input Port Select

Reset ----------------------------------------Reset button

ON/OFF ------------------------------------Power button

DC5~12V-------------------------DC Power Input Port

HDMI Input1-2-----------------------HDMI Input Ports

HDMI Output1-8------------------HDMI Output Ports

Connection diagram

1. Connect the HDMI cable between signal source and input port of Splitter.

2. Connect the HDMI cable between output port of Splitter and HDTV.

3. Connect splitter and power adapter.

4. Open the signal source and the power of HDTV, then it works.

5. Use the remote control or toggle button to select the source you want.