HDMI 1 X 8 , 4K X 2K , 3D Splitter
Introduction
HDMI Splitter is a product which can distribute HDMI signal without loss to one or more high definition display device such as HDTV. It can optimize your home theatre system to the best effect.
HDMI signal is distributed from source device such as DVD, Satellite Receiver, Set-Top Box, DV Camera, A/V Receiver and other HDMI enabled device to high definition display device such as HDTV and HDMI Flat panel Display.
Technical parameters
HDMI resolution | 3D /1080p/1080i/720p/576p/576i/480p/480i |
Support video color format | 24bit/deep color 30bit,36bit |
Support audio format | DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD |
Max bandwidth | 250MHz |
Max baud rate | 6.25Gbps |
Input/Output TMDS signal | 0.5~1.5Volts p-p(TTL) |
Input/Output DDC signal | 5Volts p-p (TTL) |
Input cable distance | ≤10m AWG26 HDMI standard cable |
Output cable distance | ≤60m Cat5e/6 cable |
Max working current | 1800mA |
Power adapter format Input | AC (50HZ, 60HZ) :100V-240V; Output: DC5V/2A |
Operating Temperature range | (-15 to +55℃) |
Operating Humidity range | 5 to 90%RH (No Condensation) |
Dimension (L x W x H) | Splitter:150x64x25 (mm)Receiver:82x43.5x25(mm) |
Weight | 650g(spilitter+Receiver) |
Features
1. Fully HDMI 1.4 specification compliant. It is applicable to source device and high definition display device ,such as DVD and HDTV which have HDMI Ports or digital ports and are compliant with HDCP protocol.
2. Support high resolutions up to including 480i/p,576i/p,720i/p,1080i/p and 4Kx2K@25/30Hz
3. Support 30/36 dark, extended color space support, including:SYCC601,Adobe RGB,AdobeYCC601
4. Blu-ray DVD 24/50/60fs/HD-DVD/xvYCC.
5. Audio formats DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3 and DSD.
6. Extend the transmission distance and improve transmission signal.
Connection diagram
Before installation, please make sure all devices you wish to connect have been turned off.
1. Connect the HDMI cable between signal source and input port of Splitter.
2. Connect the HDMI cable between output port of Splitter and HDTV.
3. Connect splitter and power adapter.
4. Open the signal source and the power of HDTV, then it works.