Digital to Analog, + Bluetooth, AV Signal Converter

1.0 INTRODUCTION

This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and support receiving audio signals via Bluetooth.It is also available for connection to an external device such as an amplifier via standard RCA-style jacks and 3.5mm stereo jack,This converter is small in size and quite easy to install.

2.0 SPECIFICATIONS

Note: Specifications are subject to change without notice.

3.0 FEATURES

This Converter has many features that enable it to perform in a superior manner. Among those features you will find:

1. Converts Coaxial or Toslink digital audio signals to analog audio.

2. Supports sampling rate at 32, 44.1, 48 and 192KHz.

3. 24-bit SPDIF incoming bit stream on left and right channels.

4. Support Bluetooth Receiver.

5. Support volume amplification and adjustment.

6. Provides electromagnetic-noise-free transmission.

7. Easy to install and simple to operate.

4.0 PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

1. Digital to Analog Audio Converter---------------------1 PCS

2. 5V DC Power Supply-------------------------------------1 PCS

3. User’s Manual----------------------------------------------1 PCS

5.0 PANEL DESCRIPTIONS

Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.

1. DC/5V---------------------------------------5V Power Input port

2. LED -------------------------------------Power Status Indicator

3. Toslink ------------------------Toslink Digital Audio Input port

4. Coaxial ----------------------Coaxial Digital Audio Input port

5. Antenna -------------------------------------Bluetooth Antenna

6. R/L ----------------------------------------R/L Audio Output port

7. Stereo ---------------------------Earphone Audio Output port

8. ON/OFF ------------Power switch and Volume adjustment

6.0 CONNECTION AND OPERATION

Before installation, please make sure all devices you wish to connect have been turned off.

1. Connect the audio source device to the Converter using appropriate Toslink or Coaxial cables.

2. Connect the A/V Receivers or Amplifiers to the Converter using appropriate RCA cable.

3. The earphone is connected to the converter 3.5mm audio interface.

4. Insert the DC side of 5v power supply into the converter and then connect the AC side of the power supply into the wall outlet.

5. Turn on the Bluetooth of the mobile device, search for the product name as T-609B, and the default connection password is 0000.

Note:When connected to the Toslink and Coaxial cables at the same time,the product will give priority to Toslink input.

7.0 Attention: Insert / Extract cable gently.

1. Please slowly plug or unplug signal cables and do not often plug , unplug , or shake them.

2. The equipment should not be placed under the sun , rain and damp or unventilated environment.

3. Liquid items should not be placed on the equipment.

4. Do not install the equipment near heat sources such as fire , power , or other amplifiers that produce heat.

5. Do not insert the metal or other objects to the equipment in addition to connecting cables to ports.

6. Do not demolish the equipment by yourself ; it should be maintained by professional maintenance staff.