HDMI , Full HD 1080P TCP/IP , Over Single Cat5e/6 With IR , (120M), Extender

Introduction

The HDMI Extender over ONE CAT5e/6 is a tool for extending your HDMI signal over long distances to a compatible display. Instead of using expensive HDMI cables, your existing CAT 5e/6 cables/sockets can be utilized to perform advanced functions like transferring Deep Color (12 bits/color) video and digital audio, with a bandwidth up to 225MHz. The HDMI Transmitter and Receiver, over ONE CAT 5e/6 extender is your substantial HDMI extender tool. The HDMI Extender also support IR re-transmitting, so you can control the Source which is 120 meters outside using the HDMI Extender.

Specification

Features

1. DC 5V power supply;

2. HDMI 1.3, HDCP 1.1 and DVI 1.1 compliant;

3. Support Deep Color up to 12 bits/color;

4. Support 20~60KHz IR re-transmitting;

5. Uses one CAT5e/6 cable for data/DDC transmission;

6. Equalizes and recovers incoming TMDS data before retransmitting it in optimal quality regardless of the incoming signal quality;

7. Cable testing showed that with 1080p resolution the HDMI input source can be 10 meters away;

8. When transmitting a signal in 1080p resolution the CAT6 operating distance is 120 meters(max).

Operation controls and Functions

HDMI Extender Transmitter

1. Power:Plug the 5V power supply into the unit and connect the adaptor to AC wall outlet.

2. RESET: Factory reset button. When the Receiver system functions have been changed, Pressing this

button for 10 seconds can realize factory reset.

3. IR OUT:Remote control signal transmit,connect the IR transmit cable with HDMI Extender Transmitter．The IR transmit cable face to the IR receiver of the Source．

4. HDMI:HDMI Input port.

5. CAT6 OUT: Connect the CAT 5e/6 output of the Transmitter with the CAT 5E/6 input of the HDMI over single CAT6 receiver.

6. LED indicator: When the DC power on, the indicator will be light.

HDMI Extender Receiver

1. Power: Plug the 5V DC power supply into the unit and connect the adaptor to AC wall outlet.

2. RESET: Factory reset button. When the Receiver system functions have been changed, Pressing this

Button for 10 seconds can realize factory reset.

3. IR IN: Remote control signal Receive,connect the IR receive cable with HDMI Extender Receiver．

4. HDMI Out: HDMI output port.

5. CAT6 IN: Connect the CAT6 in of the receiver with the CAT6 input of the HDMI over single CAT6 transmitter.

6. LED indicator: When the DC power on, the indicator will be light.

Application Example

1. Transmitter and Receiver one by one application.

2. Transmitter and Receiver one by N application, N can up to 253.