HDMI 1.3 , With Loopout+IR(60M) , Over Single CAT5e/6 Extender

INTRODUCTION

The HDMI to RJ45 Extender use single cat-5e or cat-6(recommended) cables up to 60 meters instead of HDMI cable to transmit high definition signal, for cutting down cost. Long distance transmission of high definition is very difficult because HDMI cable is very expensive and infrequent. The Extender is designed to supply for long distance transmission of high definition signal.

FEATURES

1.Signal transmission :CAT5e or CAT6(recommended) cables up to 60

meters instead of HDMI cables are connected between TX and RX

Extender.

2.Support HDMI1.3,HDCP 1.2 protocol compliant.

3. Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.

4. Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.

5. Support CEC.

6. Support 20~60KHz IR working.

PANEL DESCRIPTIONS

Please study the panel drawings below and become familiar with the signal

input(S),output(S)and power requirements.

DC/5V-------------------------------------------Power Input

Power---------------------------------------Power Indicator

HDMI Input -------------------------------HDMI Input port

IR-TX -----------------------------------------IR transmitter

HDMI Loopout ----------------------HDMI Loopout port

CAT5e/6 Out -----------------------------CAT5e/6 output

EDID -------------------------------------EDID copy button

CAT5e/6 In ---------------------------------CAT5e/6 Input

DC/5V-------------------------------------------Power Input

Power---------------------------------------Power Indicator

HDMI Output ---------------------------HDMI output port

IR-RX ---------------------------------------------IR receiver

CONNECT AND OPERATE

Before installation, please make sure all devices you wish to connect have been turned off.

1. Connect HDMI signal source to the transmitter of HDMI extender.

2. Use LAN cable(Recommend:CAT5e/6) to connect transmitter and

receiver of HDMI Extender.

3. Connect the display equipment with HDMI connector to the receiver of

HDMI extender.

4. Power on all connected devices, Choose the input of the display device

to its HDMI channel.