HDMI 2.0 , 4 x 2 , 4K x 2K , 60Hz , Matrix

TECHNICAL PARAMETERS

FEATURES

1. When its 4 input ports are separately connected to 4 signal sources
with HDMI cables, the HDMI Matrix automatically recognizes the last
connected port and switches its input signal to 2 displays;

2. Support HDMI2.0,HDCP2.2;

3. The needed input signal sources must be selected by using remote
control or pushing button in order to make 2 displays showing 2 different
Signals;

4. Use remote control or push button to freely select input source.

5. Support video format up to 4k2k@60Hz with 24bit RGB/YcbCR
4:4:4/YCBCR4:4:4,and up to 4k2k@60Hz with 12bit YCBCR 4:4:4;

6. LED indicates signal /power mode.

PANEL DESCRIPTIONS

Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.

EDID -----------------------------------------EDID Setting Switch

Toslink ------------------------------SPDIF Digital Audio Output

R/L ----------------------------------Stereo Analog Audio Output

Status/ARC --------------------------------------------ARC Switch

IR ---------------------------------------------------IR Receiver Port

B1-B4 ----------------------------------------Output B Port Status

OUT B ----------------------------------------------Output B Select

A1-A4 -------------------------------------Output A Output Status

OUT A ----------------------------------------------Output A Select

PWR ---------------------------------------------------Power Status

ON/OFF -----------------------------------------------Power Switch

DC/5V ---------------------------------------------Power Input Port
INPUT 1-INPUT 4 ---------------------------------Input 1-4 Ports
OUTPUT B -------------------------------------------Output B Port
OUTPUT A -------------------------------------------Output A Port

CONNECTION DIAGRAM

Before installation, please make sure all devices you wish to connect have been turned off.

1. Connect the HDMI from source(DVD, HD Player,PC) to matrix.(Input
cables are optional).

2. Connect the HDMI output from to the TV which has HDMI input.

3. Insert the DC side of 5V power supply into and then connect the AC
side of the power supply into the wall outlet.

4. Power on the source and TV, choose the input of TV to its HDMI
channel.

5. The image does not need to be adjusted, the matrix will position it
automatically, the user may adjust the horizontal position under
some extreme condition.

6.06Select the working mode of the matrix via the remote control or
panel button.

EDID Selector: Select HDMI output signal format via EDID Selector.