Digital to Analog, + ,3.5mm Stereo Audio,AV Signal Converter

1.0 Introduction

This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks and 3.5mm stereo jack,This Converter is small in size and quite easy to install.

2.0 Specifications

Note: Specifications are subject to change without notice.

3.0 Features

This Converter has many features that enable it to perform in a superior manner. Among those features you will find:

1. Converts Coaxial or Toslink digital audio signals to analog L/R audio

2. Supports sampling rate at 32, 44.1, 48 and 192 KHz.

3. 24-bit S/PDIF incoming bit stream on left and right channels

4. Provides electromagnetic-noise-free transmission.

5. Easy to install and simple to operate.

4.0 Package Contents

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

1. Digital to Analog Audio Converter---------------------1 PCS

2. 5V DC Power Supply-------------------------------------1 PCS

3. User’s Manual----------------------------------------------1 PCS

5.0 Panel Descriptions

Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.

1. Power: Power Input Status Indicator

2. DC 5V: 5V Power Input port

3. Toslink: Toslink Digital Audio Input port

4. Coaxial: Coaxial Digital Audio Input port

5. R/L: R/L Audio Output port

6. Audio: Earphone Audio Output port

6.0 Connection and Operation

Before installation, please make sure all devices you wish to connect have been turned off.

1. Connect the audio source device to the Converter using appropriate Toslink

or Coaxial cables.

2. Connect the A/V Receivers or Amplifiers to the Converter using appropriate

R/L cable.

3. The earphone is connected to the converter 3.5mm audio interface.

4. Insert the DC side of 5v power supply into the converter and then connect

the AC side of the power supply into the wall outlet.