HD BaseT , 4K X 2K , Over Single Cat5e/6 , HDMI , Extender
Introduction
The HDMI Extender over cat5e/cat6 is a tool for extending your HDMI signal over long distances to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal and transmit by Internet cable. It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 70 meters outside, also you can control the Sink in the Source side which is 70 meters outside using the HDMI Extender.
Specifications
Frequency Bandwidth | 2.97Gbps |
HDMI Transmitter Input/ Output Ports | 1x HDMI Female port/1 x CAT6 1x IR Transmitter |
HDMI Receiver Input/ Output Ports | 1 x HDMI Female port/1 x CAT6 1x IR Receiver |
Power Supply | DC 5V 2A |
ESD Protection Human Body Model: | ± 8kV (air-gap discharge) ± 4kV (contact discharge) |
Dimensions (mm) | 65(W) X 100 (D) X 25 (H) |
Operating Temperature | 0C ~ 40C / 32F ~ 104F |
Storage Temperature | -20C ~ 60C / -4F ~ 140F |
Relative Humidity | 20~90% RH (non-condensing) |
Features
1.One pair as a full functional module, no need for setting.
2.Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distance transmission.UTP cable termination follows the standard of IEEE-568B.
3.Transmission distance:
70 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
40meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit
4K x 2K@30Hz@24bit.
4. HDMI V1.4 supported.
5.HDCP compliant.
6. Full HD support: 1080p@60Hz@48 bit/pixels,1080p@120Hz@24bit/pixels,
7. 3D 1080P60Hz and 4K x 2K@30Hz@24bit
8. Transfer Infrared control signal together with the HDMI signal.
9. Support 20~60KHz IR working.
Operation controls and Functions
HDMI Extender Transmitter
IR-TX:IR Transmitter
Power:Power working status LED
Link:Signal connection status
Active:Working status LED
HDBaseT Out:Standard HDBaseT signal output port
DC/5V: DC Power Input port
IR-RX:IR Receiver
Power:Power working status LED
Link:Signal connection status
Active:Working status LED
HDBaseT Out:Standard HDBaseT signal input port
DC/5V: DC Power Input port
Application Example