HDMI 2.0 , CAT5e/6(60M), Full HD 1080P , Extender

INTRODUCTION

The HDMI to RJ45 Extender use single cat-5e or cat-6(recommended) cables up to 60 meters instead of HDMI cable to transmit high definition signal, for cutting down cost. Long distance transmission of high definition is very difficult because HDMI cable is very expensive and infrequent. The Extender is designed to supply for long distance transmission of high definition signal.

Specification

FEATURES

1. Signal transmission :CAT5e or CAT6(recommended) cables up to 60 meters instead of HDMI cables are connected between TX and RX Extender.

2. Support HDMI1.3,HDCP 1.2 protocol compliant.
3. Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
4. Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
5. Support CEC.
6. Audio format support

PANEL DESCRIPTIONS

Please study the panel drawings below and become familiar with the signal
input(S),output(S)and power requirements.



DC/5V-------------------------------------------Power Input
Power---------------------------------------Power Indicator
HDMI Input -------------------------------HDMI Input port
CAT5e/6 Out -----------------------------CAT5e/6 output
EDID -------------------------------------EDID copy button



CAT5e/6 In ---------------------------------CAT5e/6 Input
DC/5V-------------------------------------------Power Input
Power---------------------------------------Power Indicator
HDMI Output ---------------------------HDMI output port

CONNECT AND OPERATE

Before installation, please make sure all devices you wish to connect have been turned off.



1. Connect HDMI signal source to the transmitter of HDMI extender.

2. Use LAN cable(Recommend:CAT5e/6) to connect transmitter and
receiver of HDMI Extender.

3. Connect the display equipment with HDMI connector to the receiver of
HDMI extender.

4. Power on all connected devices, Choose the input of the display device
to its HDMI channel.