HDMI KVM, Extender Over Single CAT5e/6 With TCP/IP(200M),HDMI KVM Extender

1.0 INTRODUCTION

This HDMI KVM Extender is based on TCP/IP standard. It transmits max 200 meters from your HDMI or DVI-D source to HD display by single CAT5e/6 cable.

At the same time, it’s also convenient to transmit HDMI audio and video source by point-to-point mode, one point-to-many mode and cascade connection mode.

2.0 SPECIFICATIONS

3.0 FEATURES

1.Signal transmission :CAT5e/6(recommended) cables up to 200 meters instead of HDMI cables are connected between TX and RX Extender.

2.Support HDMI 1.3/HDCP1.1&1.2;

3.Support input/output resolution:480i/p,576p,720p,1080i/p;

4.Support point-to-point mode, one point-to-many mode and cascade

connection mode;

5.802.3 Ethernet standard;

6.Support IR control, you can control STB or Blue-Ray DVD at receiving site by

remote control;

7.The design of pure hardware, plug and play, no need for additional software;

8.Support IR remote control 20~60KHz,NEC;

9.Support long distance controlled by keyboard and mouse.

4.0 PACKAGE CONTENTS

When first unpacking your extender please check to see if the following items are included:

1. HDMI Extender Transmitter ----------------------------------- 1PCS

2. HDMI Extender Receiver -------------------------------------- 1PCS

3. IR Transmitter ---------------------------------------------------- 1PCS

4. IR Receiver ------------------------------------------------------- 1PCS

5. 5V DC Power Supply adapter ------------------------------- 2PCS

6. USB Data Cable--------------------------------------------------1PCS

7. Operation Manual ----------------------------------------------- 1PCS

5.0 PANEL DESCRIPTIONS

HDMI KVM Extender Transmitter

1. PWR ---------------------------------------------------Power Status

2. STA ------------------------------------------------------Input Status

3. LINK -------------------------------------------------Working Status

4. Reset--------------------------------------------------- Reset button

5. DC/5V-----------------------------------------DC Power input port

6. PC Input --------------------------------------------USB Input port

7. Audio In ------------------------------------------Stereo Input port

8. HDMI Input ------------------------------------ HDMI Source port

9. HDMI Output -------------------------------- HDMI Loopout port

10. Cat5e/6 Output -----------------------------Cat5e/6 Output port

11. IR-TX ------------------------------------------------------IR TX port

HDMI KVM Extender Receiver

1. PWR ---------------------------------------------------Power Status

2. STA ------------------------------------------------------Input Status

3. LINK -------------------------------------------------Working Status

4. Reset--------------------------------------------------- Reset button

5. DC/5V----------------------------------------DC Power input port

6. Keyboard/Mouse ------------------------Keyboard/Mouse port

7. Audio Out ---------------------------------------Stereo Input port

8. HDMI Output --------------------------------- HDMI Output port

9. Cat5e/6 Input ---------------------------------Cat5e/6 Input port

10. IR-RX -----------------------------------------------------IR RX port

6.0 CONNECTION AND OPERATION

6.01 Transmitter and Receiver one by one application.

1. Connect HDMI signal source to the transmitter of HDMI KVM extender;

2. Connect USB signal source to the transmitter of HDMI KVM extender;

3. Use LAN cable(Recommend:CAT5e/6) to connect transmitter and receiver

of HDMI KVM Extender;

4. Connect the display equipment with HDMI connector to the receiver of

HDMI KVM extender;

5. Connect keyboard and mouse to the receiver of HDMI KVM extender;

6. Turn on the power of all devices and the product starts to work.

6.02 Transmitter and Receiver one by N application, N can up to 253.

7.0 INSTALLATION AND PRECAUTIONS

To avoid electric shock , product damage and to protect your safety , please notice the following:

1. Please slowly plug or unplug signal cables and do not often plug , unplug , or shake them.

2. The equipment should not be placed under the sun , rain and damp or unventilated environment.

3. Liquid items should not be placed on the equipment.

4. Do not install the equipment near heat sources such as fire , power , or other amplifiers that produce heat.

5. Do not insert the metal or other objects to the equipment in addition to connecting cables to ports.

6. Do not demolish the equipment by yourself ; it should be maintained by professional maintenance staff.