Servo PET Small Injection Molding Machine With hydraulic system

1. FEATURES

Optimizing the toggle structure design,the machine reduces mould open stroke against cable tie’s mould,which decrease mould opening time greatly .

Special screw and barrel for nylon cable tie ,the plasticizing capacity is high ,melt speed is fast .

Mould platen,machine frame ,toggle structure parts,rigid strengthened to ensure the life of the machine

Injection speed is faster than normal machine

Control part

It adopts imported plastic injection computer ,with large screen high definition crystal display and human-computer interface in both Chinese and English ,Through CPU independent control and treatment ,it has raised the running speed of the control system and alarming of ultra-high oil temperature ,thus improving the operating speed of the machine ,it uses closed -loop temperature control system to ensure the accuracy and the reliability of the barrel temperature,it is also equipped with the functions of cold-proof start ,alarming and parameter memory for the modeling ,with password protection ,The injection and switch are controlled by imported location ruler

Clamping part

Oil motor drives the adjustment of gear mould ,with good synchronization ,The die can be adjusted automatically in accordance with the set pressure ,which is both convenient and reliable .

Five -suppport crankshaft structure ,the mold and the supports all use the portal structure ,with good rigidity and high fitting precision ,Adopting the computer optimized design,the mold employs definite analysis less system .with double core pulling device,it boasts super sensitive low pressure protection functions,The mechanical ,hydraulic and electrical protections have ensured thye human safety ,The dismountable fill-out hopper can be installed conveniently and automatically ,The moveable platen is running in roll,with little friction and balanced and dependable moving

The excellent chrome,molybdenum and aluminum alloy screw and barrel have undergone the nitriding process ,applicable to various plastic materials , The injection cylinder is parallel of balance to both sides of the barrel ,so as to ensure the non deviation of the nozzle ,good sealing and no leak age of rubber .it is equipped with double guide pillar supporting system ,which can inject under multi-pressure and at various speeds ,it also uses one -stop hydraulic motor pre-injection device

2. Specifiation:

3. Configuration:

4. Platen drawing