HDPE bottle waste crusher bottle cutting machine to bottle flakes Claw Crusher

Applicable to the crushing and reuse of various plastics, especially for all types of rigid plastics (such as material heads, shoes, etc.).
Crusher blade
Crusher blade
The crusher is easy to operate, the tool change is simple and convenient, and the tool holder is optimized. The claw cutter can disperse the force and make the shear force of each knife increase. It is suitable for crushing thick materials, hard material blocks, material heads, etc. The tool cutting force is improved and the tool wear is reduced. The electronically controlled safety design is provided. The hopper adopts a double-layer structure and is filled with sound-insulating material, so that the equipment has good safety and environmental protection, and is power-saving and durable. 1, all-steel welding base, sturdy and durable.
2, easy to disassemble design, easy cleaning and maintenance.
3, imported Ming-steel tools, sharp edges, easy replacement, durable.
4, smash all kinds of soft and hard plastic, easy and easy.
5, with motor over-planting and electrical chain protection system to ensure safe use.
6, can choose different tools and different holes through the screen.

Knife Crusher
Slice knife structure is between claw knife and flat knife and is suitable for crushing plastic products and outlet materials such as ordinary sheets, pipes, profiles, plates and packaging materials. General-purpose plastic crusher uses sealed bearings to keep the bearings rotating for a long time; the knife type is designed reasonably and the product is evenly granulated; the knife block is heat-treated and the exterior design is elegant and generous.
1, all-steel welding base, sturdy and durable.
2, easy to disassemble design, easy cleaning and maintenance.
3, imported Ming-steel tools, sharp edges, easy replacement, durable.
4, smash all kinds of soft and hard plastic, easy and easy.
5, with motor over-planting and electrical chain protection system to ensure safe use.
6, can choose different tools and different holes through the screen

Flat knife crusher
Flat crushers are suitable for the recycling of plastics like boxes, thin tubes, blow molded parts, bottles and shells. The crusher is easy to operate, and the tool change is simple and quick. The flat cutter has a large structure and is suitable for crushing large-volume thin-walled and thin material products to improve the crushing efficiency. The electronically controlled safety design is adopted. The hopper adopts a double-layer structure and is filled with sound insulation materials. Attached with an overload protection device, power chain protection system, making the device has a good security and environmental protection, saving power and durable.
1, all-steel welding base, sturdy and durable.
2, easy to disassemble design, easy cleaning and maintenance.
3, imported Ming-steel tools, sharp edges, easy replacement, durable.
4, smash all kinds of soft and hard plastic, easy and easy.
5, with motor over-planting and electrical chain protection system to ensure safe use.
6, small machine with a pulley, easy to move, the main machine will have a water-cooled system to facilitate the time action.
7, can choose different tools and different holes through the screen.


Maintenance
1. The plastic crusher should be placed in a ventilated position to ensure that the motor working heat is dissipated and its life is extended.
2. Lubricate the bearing regularly to ensure the lubrication between the bearings.
3. Check the tool screws regularly. After using the new plastic crusher for 1 hour, tighten the movable knife with the tool and fix the screws of the knife to enhance the fixing between the blade and the knife holder.
4. In order to ensure the sharpness of the tool incision, the tool should be inspected to ensure its sharpness and reduce unnecessary damage to other components caused by the blunt blade.
5, when changing tools, the gap between the moving knife and the fixed knife: 20HP more than the best 0.8MM crusher, 20HP following 0.5MM better than the crusher. The thinner the recycled material, the larger the gap can be.
6. Before the second start, the remaining scraps in the machine room should be cleared to reduce the starting resistance. The inertial cover and pulley cover should be opened periodically to remove the ash outlet below the flange. The plastic crusher chamber discharges the powder into the shaft bearing.
7. The machine should be well grounded.
8. Regularly check whether the plastic crusher belt is loose and tighten it in time.

China Plastic Pet Bottle Pp Film Crusher Aluminum Recycling Equipment Of Cans Crusher - Buy Plastic Pet Bottle Crusher,Pp Film Crusher,Aluminum Can Recycling Equipment Product