Right Angle or Straight DIP Ejector Latch Header Male IDC Connector 2.00mm

Product Application

The difference between the box header connectors and the ejector header connectors is that there are two more buckles on both sides. According to the demand, there are three commonly used specifications of the outer size of the ejector header connector: 1.27mm pitch, 2.0mm pitch, 2.54mm pitch.
The diameter of the square row of needles used varies according to the spacing. The bottom contact surface with PCB board can be designed for SMT SMT type or DIP direct insert 180 degrees.

Application: After welding the ejector header connector on the PCB board, connect the IDC cable with the corresponding specifications. It will form a new circuit connection with another circuit, which usually used to transmit control signals and weak currents.

Why choose us

1. Competitive Price
We have a whole set production process which include electroplating, stamping, injection molding, assembly to ensure our competitive price.
2. Fast Delivery
Most efficient producing makes fast delivery, which would make sure of the lead time always ahead of your expectation.
3. Equipment advantage
Our factory occupied area is about 15000 square meters. There are more than 300 sets of precision connector production equipment, 16 sets of precision plastic injection machine, 80 sets of precision high-speed punch, at least 100 sets of various plastic models and more than 200 sets of hardware terminal models. We have advanced technology and equipment to guarantee product quality !

Specification

FAQ

1. Can I get some samples?

Yes, sample order is available for the quantity check and market test. You can contact with us for some free sample with freight collect.
2.What's the delivery time?

The delivery time will depends on the quantity that you need, which usually takes 7-14 days.
3. How to get the price faster?

Contact with us, give us your requirements, of course it's better that you can give picture or drawing or original No.