Electronic 16A thermostat floor heating cable thermostat
Introduction
The SK20 is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat. The thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.
Application
For the control of warm-water(floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...
Features
LED indicator is light when heating is on
With manual switch and knob for easy operation
On/off control output for heating device
Setback function when connecting with a programmable timer (RTC70.33&RTC70.36)
Temperature limitation function for protecting the floor (RTC70.33&RTC70.36)
Parameters
Power Supply | AC200-240VAC 50/60HZ |
Accuracy | ±0.5ºC |
Probe sensor | NTC |
Power Consumption | <0.3W |
Load current | 3A(water heating),12A/16A(electric heating) |
Temperature Adjustable Range | 5 ºC - 60 °C |
Limit Temperature Range | 5-99°C |
Output | Switch relay |
Insulating condition | Normal environment |
Running program | Set per 1 week as a cycle |
Installation | Wall mounted |
Application | Water Floor Heating System |
Electric Floor Heating System | |
Infrared Heater System | |
Certificate | CE,RoHS |
Packaging & Delivery
Packaging Details
1pc to a small box, 64pcs to a carton size of carton: 43cm*39cm*29cm
Delivery Time
15 days after receive your payment
Circuit diagram
Dimensions