Where can we order fast filler machine for electric heater?How to buy fast filler machine for electric heater?Is there a heater machine factory make fast filler machine for electric heater? How to custom fast filler machine for electric heater from China?

TLD-24 Fast Filling Machine is a stand-alone order mechanism. It works in the same way with the TLQ-24.Both TLD-24 and TLQ24 are of the single-direction mechanism, namely, single-deck guiding pipe. It equips mandrel inside the pipe, which serves to locate the heating wire module. At the top of the pipe, there is a linear cutting binding head weld; it is coupled with the hole inside the pipe. Magnesium powder flow down from the outside of the guiding pipe. Great capacity and accelerative filling speed are the main advantages of this machine, while density deficiency is the chief disadvantage, which usually is around 2.15g/cm3. The binding head would be easily stuck inside the pipe which leads to the failure of filling if the density is increased. The machine adopts gear motor to drive the rising of the guiding pipe mechanism, which is more stable comparing with the gas liquid turning mechanism. This machine uses PLC touch screen to control, the length of filling will be more correct.

The machine suitable for short tubes in large diameter.

Fast filling: about 6000-8000 PCS / 8 h.

TLD-24 Fast Filling Machine is a stand-alone order mechanism. It works in the same way with the TLQ-24.Both TLD-24 and TLQ24 are of the single-direction mechanism, namely, single-deck guiding pipe. It equips mandrel inside the pipe, which serves to locate the heating wire module. At the top of the pipe, there is a linear cutting binding head weld; it is coupled with the hole inside the pipe. Magnesium powder flow down from the outside of the guiding pipe. Great capacity and accelerative filling speed are the main advantages of this machine, while density deficiency is the chief disadvantage, which usually is around 2.15g/cm3. The binding head would be easily stuck inside the pipe which leads to the failure of filling if the density is increased. The machine adopts gear motor to drive the rising of the guiding pipe mechanism, which is more stable comparing with the gas liquid turning mechanism. This machine uses PLC touch screen to control, the length of filling will be more correct.

The machine suitable for short tubes in large diameter.

Fast filling: about 6000-8000 PCS / 8 h.

Com.: Zhao Qing City Feihong Machinery & Electrical Co.Lt
Add.:Shui Ji Village, Dachong,Duanzhou District, Zhaoqing City, Guangdong Province, China
Email:info@tubemachines.com may@zqfeihong.com
Mob/Whatsapp/Wechat : (86)13424485791
Tel.:(86-758) 2777969
Web.:http://tubemachines.com