Woven High-speed Corrugator Belt with Kevlar Edge
Introduction:
Woven high speed corrugator belt was developed to transfer board and the rapid drying of the board. The structure and the quality fabric of the belt facilitates steam evaporation from the board. The belt is 3-layer belt. The structure of two surface layers are not the same as the middle layer. This structure is developed to produce flat boards on high-speed corrugating machines. The surface of the belt is twill, this reduces the noise while the belt runing on the machines. The material of the two surfaces layer is not the same as the middle, this can increase the friction coefficient
Our High-speed Corrugator Belt with Kevlar(low noise) , applicable to the corrugating equipment which cardboard width is changed often;
Specification:
Brand | ANKE |
Material: | Polyester synthetic fiber |
Weight Per unit: | 7.5 ± 0.3 kg/ m2 |
Thickness: | 9 ± 0.3 mm |
Width: | 1600 ~ 3200mm |
Length: | Customized |
Heat Resistant: | 200 °C,Edge part up to 350°C |
Tensile Strength: | 70 Mpa |
Coefficient of Friction | ≥0.40μ |
Air-permeability (40mm Water Column) | 2.0 m³/㎡ min |
Main applications:
The Solid Woven Polyester Belt is one main special part of corrugated machine automatic production line. Its main function is to ensure that the board transportation and the rapid evaporation of the water in board.
Product Features:
1.Strong tensile capacity
2.Polyester synthetic fibers material with high heat resisting property.
3.Quick absorbing moisture from the cardboard.
4. Good air-permeability.
5. American needle - withstand high temperature and firmly.
6. Fit all kinds of corrugated cardboard production line.
7. High woven density Keep size stable.
FAQ:
Welcome your inquire and trial order. If you need info about other products, please feel free to contact with us.