Factory Design Customized Agriculture Cylinder Tie Rod Hydraulic Cylinder

Our Company Advantages:

1. ISO 9001 MANUFACTURER

2. 20 YEARS HYDRAULIC PRODUCTS EXPERIENCE

3. SHORT DELIERY TIME

4. PROFESSIONAL DESIGNER

5. WE ARE FACTORY, WE CAN CONTROL THE BEST QUALITY, WE ALSO HAVE BEST PRICE, AND BEST SERVICE

Commodity Information

1. Intended use: Double acting applications.

2. Tube: Precision honed steel.

3. Rod: Hard chrome plated rod or Nitride piston rod.

4. Seals: Manufactured to US specifications.

5. Casting: Ductile iron QT450-12,QT500-7,Aluminum.

We can also manufacture as per customer's requirement, contact us if you have any special requirements.

The hydraulic cylinder has a wide range of uses and a competitive price. There are a variety of configurations available to meet the demands of many industries. Although there are many different types of hydraulic cylinders, they are worked on the same basic principle: the piston generates force by driving the rod with pressurized fluid. The force always be transmitted in two ways as below:

1. Single acting hydraulic cylinder

These hydraulic cylinders have one port, by which hydraulic oil is pumped to move the rod and extend. The rod retract by the weight of the load.

2. Double acting hydraulic cylinder

These cylinders have two ports, so the hydraulic fluid can be pumped in both directions to extend and retract the rod.

Tie rod, welded and telescopic are the most widely used type hydraulic cylinder, other customized hydraulic ram are also available for different applications.

1. Tie rod hydraulic cylinder

Tie rod cylinders are the most cost effective and flexible type of hydraulic cylinder, it consists of two end caps and is connected to the cylinder by four threaded steel rods, this makes repair simple. HRHD supply standard tie rod cylinders with different sizes.

2. Welded hydraulic cylinders

Welded hydraulic cylinder are widely used in mobile applications,the base ends are welded directly onto the tube, welded cylinders are more durable and working pressure could be higher than tie rod cylinder.We offers several ends for our standard welded cylinders: welded cross tube, pin-eye, clevis.

Q1: Are you a trading company or a factory?
A1: We are a trading company and have our own factory. We have both the price advantage of the factory and the thoughtful service of the trading company; and the advantage of taking responsibility.

Q2: Can you OEM production?
A2: Yes, we can customize production according to the drawings.

Q3: How long is your delivery time?
A3: If the goods are in stock, usually 3-7 days. Or if the goods are not in stock, then 20-45 days, depending on the quantity.Always welcome you to visit China for ordering!

Q4: Do you test all your goods before delivery?
A4: Yes, we have 100% test before delivery.

Q5: Is it convenient to visit your factory ?
A5: Yes,we welcome every customer to visit our company.

Q6: What is your steel material?
A6: Q345B,Q235B