CE Certificated Clean Room Stainless Steel Air Shower Pass through

Air showers are the preliminary entryways of clean rooms after the gowning rooms. The purpose is to reduce particle contamination via high-pressure air to remove dust, fibrous lint, and other contaminants from personnel or object surfaces. It significantly reduces the number of airborne particulates introduced, leading to a clean environment for high-quality production.

High-velocity air jets
High-velocity shower jets running at 18-30 m/s to ensure efficient scrubbing action to remove particulate matter​

Stainless steel nozzles

Permanently lubricated direct drive centrifugal blowers used in conjunction with stainless steel air nozzles​​

Programmable operation
Operating modes can be programmed in the field ​​​

Reliable microprocessor control system
Microprocessor controller supervises all functions​​​​

HEPA or ULPA filtration
Filter efficiency of H14 HEPA filter(s) is 99.9995% at 0.3 micron particles, while ULPA filter(s) provide 99.9999% typical efficiency for particle sizes of 0.1 to 0.3 microns.​​​​

Pre-filtration
A disposable prefilter with 85% arrestance extends the life of the main filter.​​​​

Emergency buttons

An emergency stop button is mounted on both sides of the shower​​​​​

Indicator lights to signal door status
Indicator lights mounted on both sides of the exterior of the air shower to regulate traffic flow, in and out of the cleanroom.​​​​​​

Durable doors
Heavy-duty, durable doors with glass windows to permit visibility.​​​​​​

Powder-coated steel construction
The air shower is constructed of electrogalvanized steel sheets with an abrasion-resistant oven-baked powder coated finish. (Optional: Stainless steel 304 construction)​​​​​​

Uniform lighting
Light diffusers ensure uniform lighting throughout the chamber​​​​​​

PERSONAL AIR SHOEWR/TUNNEL Specifciation: