Electronical Interlock Air Shower Stainless Steel Shower Room

The air shower principle of operation is the impulsion of jets of ultra-filtered air at high speed (> 35 m / s) on the person or material to be cleaned to produce the separation of the particles deposited on its surface.

Air is propelled by columns of horizontally driven aerodynamic nozzles located along with the four angles of the shower, which makes it possible to cover the entire useful height of the enclosure. The incidence of air jets with tangential effect favors the total detachment of the particles since a frontal incidence would cause the force of the air jet to produce an increase in adhesion of the particles to the surface instead of their separation.
Likewise, a good design and placement of the air returns are essential, which ensures the removal of the particles from the enclosure effectively and immediately to avoid that the detached particles can be deposited again or remain inside the shower and go outside with the door opening. In the showers, the particles are dragged by the crash of high-speed air jets.

In addition, by high filtration of the air before being driven inside the cabin, a very low particle level is achieved. The cabins have an automatic start-up system and interlocks that can be programmed according to the needs of each cabin. Depending on your application, two basic types can be differential air shower for people and an air shower for materials.


Details

Filter system: Standard high efficiency paneled filter with an efficiency of 99.99% @0.5μm to ensure dust removal.

Nozzle: The wind velocity reaches as high as 20m/s. The material (stainless steel) is 1mm thick stainless steel and the diameter is 25mm. In a double sided shower, there are 6 nozzles on each side of a 1-meter deep air shower room, for a total of 12 nozzles. With 12 nozzles on each side of a 2-meter depth air shower room means there is a total of 24 nozzles, and the nozzle direction can be adjusted at multiple angles.

Box: Cold-rolled steel sheet with surface paint, electrostatic spray treatment on the surface of the steel sheet, stainless steel is also optional.

Door: The door is made using 201 stainless steel and equipped with a strong transparent glass window. Both doors have electronic interlocking functions to ensure that when the air shower room is in operation, both doors cannot be opened simultaneously, thus preventing pollution from entering the clean room.

Control system: The air shower room is controlled using advanced integrated circuits. The microcomputer has an intelligent voice prompt function and uses touch-type micro switches, for smooth, convenient operation.
Time relay: Adjust the air shower time between 0-99 seconds.

Motor: 0.75 KW for each motor.

Applicable power supply: 380V/50Hz, 220V /60HZ


Air shower Applications:
Pharmaceutical Industry
Animal Facilities
Gold Producers
Cloth Manufacturer
Semi-conductor Laboratory
defense research Lab
Chemical Laboratory
Electronics Industry
Food Testing Laboratory


Person Air Shower Specifications: