ISO 7 Clean room project Clean Booths Modular Cleanrooms,Clean room tent

An ISO 7 clean room (Class 10,000 cleanroom) is a hard-sided wall manufactured facility that utilizes HEPA filtration systems to maintain air cleanliness levels of a maximum of 10,000 particles (≥0.5µm) per cubic foot. Class 10,000 cleanroom filtration systems must provide filter coverage of 15-25% and – a minimum of 60 air changes per hour. The standard air flow rate for an ISO 7 filtration system is 9-16 CFM per square foot.

Cleanrooms By United produces fully functional ISO 7 cleanrooms that meet all required specifications and requirements. We provide the layout, square footage, and features that your project specifications require. The custom, flexible, modular construction of our ISO 7 clean rooms makes them easy to expand, reconfigure, or relocate as your cleanroom needs evolve.

Contact us for more information regarding our ISO 7 clean room options and we will gladly answer any questions that you may have. Cleanrooms By United is your trusted source for premium grade, high-efficiency ISO 7 clean rooms.

Common ISO 7 clean room requirements include:

Product pass throughs

HEPA fan filters

Heat welded vinyl or epoxy floors

Gowning atrium

Air locks

Air conditioners

Entrance and exit sticky mats

Sealed lighting

Bunny suit, booties, and hood requirements

Stainless steel bench and hands free sink

ISO 7 CLEANROOM (CLASS 10000 CLEAN ROOM)

This is one of the most common classes of cleanrooms. If you need an ISO 7 cleanroom, you should consider having an ISO 8 airlock/gowning room prior to entering the ISO 7 room. The air changes per hour will vary in both rooms as described below.

ISO 7 zone | 30–60 air changes per hour

ISO 8 zone | 15–25 air changes per hour (ante-room)

Why use ISO Class 7 Cleanroom?

The ISO Class 7 Cleanroom facilitates the needs of many different types of clients manufacturing requirements as it maintains extremely low levels of particulate matter such as dust and airborne organisms – quantified by 10,000 particles per cubic meter. The Class 7 environment is tested to ISO 14644-1 and the HEPA (High Efficiency Penetration Air) filtration rate is over 99% efficient.

Key Plastics is certified to ISO 13485- Medical Devices

An Industry Example – Medical Devices and Cleanrooms

Invasive procedures involve contact between a medical device or surgical instrument and a patient’s sterile tissue or mucous membranes. Therefore, for safety (and legal) issues – absolute precision and effectiveness is a non-negotiable when it comes to selecting a Cleanroom for medical device manufacturing.