Low Noise Customizable Dc Brushless Motor 86BLF06C 48v Nema 34 2 A 0.1 OHMS
Are you looking for a high-reliability, high-efficiency and high power-to-size ratio motor? The obvious solution is a Brushless DC (BLDC) motor. It shares many of the same torque and speed characteristics with the Brushed DC (BDC) motor but does not include the brushes. Technically, it is a Permanent Magnet Synchronous Motor (PMSM), but it's named Brushless DC as it operates from a DC power supply using an inverter with a simple commutation method and that there are no brushes involved. In some cases, the stator windings are constructed to match the non-sinusoidal commutation.
Brushless DC motor (BLDC motors) also known as electronically commutated motors are synchronous motors powered by DC electricity via an inverter or switching power supply which produces an AC electric current to drive each phase of the motor via a closed loop controller.
Electrical Specification
ROTATION: CW SEE FROM LWAD END
Manufacture Model | 86BLF06C | |
Resistance | OHMS | 0.1 |
Nominal Voltage | VDC | 48 |
Rated Speed | Rpm | 3000± 300 |
Rated Current | A | 2 |
Rated Torque | N.m | 1.8 |
No-load Speed | Rpm | 4000 |
No-load Current | Amps | 2 |
Torque Constant | N.m/A | 0.11 |
Back EMF constant | V/kRPM | 12 |
Insulation Class | B |
Wiring Diagram
ELECTRICAL CONNECTION TABLE | ||
+5V | WHT | UL1007 26AWG |
HALL A | RED | |
HALLB | YEL | |
HALLC | BLU | |
GND | BLK | |
PHASE A | YEL | UL1015 18AWG |
PHASE B | GREEN | |
PHASE C | BLU |
Hetai Production Process
QUALITY CONTROL PROCESS
Incoming Inspection
Measure Diameter Measure Length Measure Hardness
Stator Inspection
Measure Height Measure Resistance Test Waveform Test phase Test withstand voltage
Rotor Inspection
Rotor Positioning Measure core thickness Measure Rotor Check motor Measure the outer circle
shaft length misalignment
![]() | ![]() | ![]() |
Stepper motor ROHS report Date: June 09, 2021 | BLDC Motor ROHS report Date: June 09, 2021 | CE cetificate |
![]() | ![]() |
IATF 16949: 2016 Valid until: 02 June 2024 | ISO 9001: 2015 Valid until: 02 June 2024 |
Package&Delivery
FAQ
1.Are you factory?