Hydrogen fuel cell power generator Automatic oxyhydrogen welding machine copper tube brazing

Why do we use oxyhydrogen generator?

Gas cylinders can be extremely dangerous and gas oxyhydrogen generator is quite safe since

it does not require gas cylinders and no risk of leakage and explosion.

Oxyhydrogen welding machine Principle

Water = Fuel!

It doesn’t need gas cylinder, it only needs little water + electricity!

1CBM HHO gas = 3 KWH electricity + 0.58 L water Straight laser flame, 2800 ℃ Non harmful gas!

Don’t need to store gas!

It improves sealing efficiency about 70%.

Oxyhydrogen generator consumes water and electricity and electrolyzes water in hydrogen gas and oxygen

gas , We can use H2 and O2 as source of flame replacing LPG,Propane,Acetylene fule or natural gas or other

fuel

Comparison among oxy-hydrogen gas,acetylene and propane

Advantage of Oxy-hydrogen gas flame

• High temperature:2800 ℃.
• High caloric value:34000kcal/kg.
• Laser flame,fast heating speed.
• Non-pollution:Only use water and electric.
• Non-toxic: No smoke .
• Non-explosion:Low pressure,zero storage.
• Energy saving:save 40%-60% fuel.
• Wide application:Anywhere that need flame.
• Comparison among oxy-hydrogen gas,acetylene and propane.

Model	DY100	DY200	DY300	DY400	DY600
In put Voltage	110/220V Single phase	110/220V Single phase	110/220V Single phase	110/220V Single phase	110/220V Single phase
Rated Power(KW)	0.4	0.8	1.2	1.6	2.4
Working Pressure	≤0.2 Mpa	≤0.2 Mpa	≤0.2 Mpa	≤0.2 Mpa	≤0.2 Mpa
Gas Output ±10%	0-100L/H	0-200L/H	0-300L/H	0-400L/H	0-600L/H
Water Consumption	0.05L/h	0.11L/h	0.16L/h	0.21 L/h	0.32 L/h
fuel used	Pure water	Pure water	Pure water	Pure water	Pure water
Cooling Model	Air cooling	Air cooling	Air cooling	Air cooling	Air cooling
Water Supply Mode	Manual	Manual	Manual	Manual	Auto
Ambient temperature℃	0-40	0-40	0-40	0-40	0-40
Dimension-L*W*H	380*250*480 MM	450*250*480 MM	580*250*480 MM	680*250*480 MM	880*250*480 MM
Weight	14kg	17kg	22kg	30kg	35kg
Photo

Model	DY1000	DY2000	DY3500	DY6000	DY10000
In put Voltage	110/220V Single phase	380V three phases	380V three phases	380V three phases	380V three phases
Rated Power(KW)	3.5	7	12	21	35
Working Pressure	≤0.2 Mpa	≤0.2 Mpa	≤0.2 Mpa	≤0.2 Mpa	≤0.2 Mpa
Gas Output ±10%	0-1000L/H	0-2000L/H	0-3500L/H	0-6000L/H	0-10000L/H
Water Consumption	0.54 L/h	1.1 L/h	1.9 L/h	3.2 L/h	5.4 L/h
fuel used	Pure water	Pure water	Pure water	Pure water	Pure water
Cooling Model	Air cooling	Air cooling	Air cooling	Air cooling	Air cooling
Water Supply Mode	Manual / Automatic	Auto	Auto	Auto	Auto
Ambient temperature℃	0-40	0-40	0-40	0-40	0-40
Dimension-L*W*H	660*570*770 MM	1130*680*1030 MM	1200*770*1300 MM	1360*850*1700 MM	1500*910*1900 MM
Weight	90kg	180kg	340kg	480kg	850kg
Photo

HHO welding solution for Electric Motors

High quality and safety,efficiency and innovation.

Advantages

• Quickly remove every insulation from wires no need of mechanical systems.

• Make copper connections up to 2.500 mm2 so quickly that the material doesn’t overheat.

• Commutators soldering.

• Squirrel cages brazing.

• Remove bearing,rings and pulleys.

• Clean stator and rotor slots perfectly in a few seconds.

Other applications

Diamond Segment Welding , Ampoule filling welding , Platinum Resistor Welding ,

Electronic Components welding , Steel Cutting , Acrylic Polishing ,

nstrument Welding , Wax investment Casting , Enameled Wire Welding ,

thermocouple Welding , QuartzGlass Tube Sealing , Jewelry Welding