Molybdenum Disilicide Rod Heating Elements for Dental Sintering Furnace

Molybdenum Disilicide Rod Application:

SUPER 1700, 1800 type molybdenum disilicide rod for dental sintering furnace are extensively used in the industries of metallurgy, glass, ceramic refractory,crystal electronic device, industrial furnace manufacture, etc.. It is an essential ideal element when the products are sintering in the high temperature.

Attention: MoSi2 elements can not be used in 400 to 700 °C for a long time, otherwise, it will be powered and damaged due to strong oxidizing action in low temperature.

* Shape: I, U, UL, W, WL, Irregular
* Diameter: 3/6, 4/9, 6/12, 7/14, 9/18, 12/24(mm)
* Temperature: 1700°C, 1750°C, 1800℃

Molybdenum Disilicide Rod have good resistance characteristic, so it is an ideal heating material to replace traditional heating elements.

Resistivity of MoSi₂ (Molybdenum Disilicide) heating element rises dramatically when temperature rises. Power output is less than 35% of the max. output at 300°C. Resistance of a MoSi₂ heating element does not change under normal use, and you can mix new and old elements together.

Generally a separator should be placed in between two shanks of heating element when installing the heating elements in the furnace. Please make sure the width of the separator matches the space of the heating element. If the separator is too big it may break the heating element during installation

Specification of Molybdenum Disilicide Rod :

d = the diameter of hot zone

c = the diameter of cold zone

Le = the length of hot zone

Lu = the length of cold zone

a=Shank spacing

g=junction length

Physcial Property of Molybdenum Disilicide Rod:

Packing and shipping :

Export carton packing box for small qty;

Export wooden packing box for large qty.

Fedex/DHL/UPS/TNT for samples, Door-to-Door;

By Air or by Sea for batch goods;

Customers specifying freight forwarders or negotiable shipping methods;

Delivery Time: 3-7 days for samples; 5-15 days for batch goods.