300kg Copper Melting Electric Heating Furnace Automatic Tilting Enery Saving

Copper melting electric heating furnace , mainly used in melting point is lower than 1200. C metal melting and purification, fusion metal alloy material.It is widely used in industry production for metallurgy, casting, alloy workpiece manufacturing etc.Also by the laboratory select and use for metallurgy process research, casting process research, alloy process research, etc.Because it does not produce by waste gas, waste water and noise etc.,does not polluting the environment, so it is replacing the traditional metal smelting melting equipment.

Environment and condition usage for induction melting furnace

1. Temperature should be at 2℃ to 35℃.

2. The relative humidity no more than 90%

3. Installation height not higher than 1000m

4. No conductive dust and corrosive gas in working place.

5. No explosion and violent vibration room around the place

6. The temperature of the the cooling water should no less than 10℃,not more than 30℃,hardness<8 degree,Ph<degrees,pressure>0.2Mpa.

7. Power supply must be AC 380V 3-phase 50Hz/60Hz,Voltage fluctuation 370-410Volts.

Advantages of electric heating furnace:

• High melting efficiency, good power saving effect, compact structure and strong overload capacity;
• The temperature around the furnace is low, the smoke dust is less, and the working environment is good;
• The operation process is simple and the smelting operation is reliable;
• Uniform metal composition;
• The melting temperature rises quickly, the furnace temperature is easy to control, and the production efficiency is high;
• The furnace has high utilization rate and convenient variety change

Technical parameter of 300kg copper melting furnace :

Our service :

Quality control of copper melting furnace

To ensure that customers use our induction furnace with no worries, hereby we warrant:

1. We strictly select good material to ensure the reliable quality.

2. Not only in the selection of materials, but also in every production procedures, we strictly act according to the ISO9001 standard, and control by full-scale inspection.

3. The Technical and specialized support from us will be available.

4. The upgraded products information will be timely supplied.

Packing & Shipping

Small induction melting furnace will be packed by standard plywood case for exporting ;

Suppose your order is of big volume or 1pc furnace with large capacity, the products will be delivered by 20GP or 40GP container. Top open container is optional as well.