Well-Type 650C Gas Nitriding Electric Heating Furnace Resistance Wire Heating Element

Introduction of electric heating furnace:
Pit type gas nitriding furnace is cycle type furnace, apply to the pole, long axial parts heat treatment. The Wells of the furnace body is cylindrical, by special crane installed vertically within the charging heating workpiece. Pit type furnace is usually placed below the ground plane in the shop, also have placed above the ground plane, or each half of the under ground plane.

What we can get by this heat treatment furnace :

1) To obtain high surface hardness

2) To increase wear resistance and antigalling properties

3) To improve fatigue life

4) To improve corrosion resistance

5) To obtain a surface that is resistant to the softening effect of heat at temperatures up to the nitriding temperature.


More about our well type furnace
1. Use for heat treatment in air of steel parts especially the long pieces .When the process requires, may pass into the protective atmosphere to reduce oxidation of the workpiece.
2. Two area control ,using intelligent digital display instrument with silicon controlled temperature control, also have heat preservation time relay, with the function of over temperature alarm.
3. The heating element is 0Cr21Al6Nb heating filament.
4. Lining by energy-saving light and aluminum silicate refractory fiber and diatomite brick.
5. Furnace cover open by leverage.
6. Equipped with heat resistant steel skirts in the middle.

Warranty
Our warranty period comes from the machine begin to run normally and we will provide the whole life technology support to you for free.
All products sold by our company In warranty period,we will provide you the spare parts for free. Our engineer will help you do the aftersales through our remote control system.When out of one year warranty time, we will provide the spare parts with the cost price for the whole machine lifetime.