CPU High Flow Filter Cartridge 110m³/H Flow Rate PP Membrane Water Filtration Free Sample
General Description
PHFL series high flow filter cartridge widely used for Seawater desalination RO system, power plant condensate polishing water, industrial process water, etc. Filtration rating from 1 microm to 150 micron, length available 20", 40", 60".
Application:
1. Pharmaceutical industry: Pre-filtration of drugs, distilled water, biological products, various antibiotics, etc.
2. Electronics industry: Filtration of industrial water such as electronics, microelectronics, and semiconductors.
3. Food and beverage: Beer, wine, soft drinks, dairy products, bottled water, fruit wine, juice, syrup, cooking oil, etc
4. Industrial filtration: Energy, coatings, graphite, petrochemical, electroplating, mining, machining, industrial water treatment.
5. Water treatment: Drinking water, commercial water treatment, desalination
Features and Benefits:
* 40” outer cage is one piece, with high strength can withstand one adult weight, ensure big effective filtration area, long life;
Inside to outside flow direction keeps all of the contamination catched;
* Gradient aperture deep polypropylene fiber filter media, aperture along the fluid motion direction becomes smaller, levels intercept different sizes particles, which has excellent dirt holding capacity and low flow resistance.
* Easy installation save, less cartridge change out help customers save the labor cost;
* Integral support, high strength, high dirt holding capacity, long service life;
* Single cartridge could achieve flow rate 110m3/h;
* Filtration systems are 50% smaller than typical size system;
* Filtration efficiency reach 99.8%;
* Strict quality control system, complete production process flow;
* Short delivery period;
* Flexible payment method: T/T, L/C, West Union, Paypal;
* Free technical support;
* MOQ 1 piece;
* FREE sample.
Performance Specifications
Dimensions(nominal)
OD |
6” (152mm) |
Length |
20"(508mm), 40"(1016mm), 60"(1524mm) |
Material of Construction:
Model |
Filter Media |
Support/Drainage |
End Caps |
Seals Material |
PP |
Pleated depth |
Polypropylene |
Glass Fiber Reinforced Polypropylene |
NBR, Silicone, EPDM, Viton
|
PP |
Melt blown |
/ |
Glass Fiber Reinforced Polypropylene |
Filter Performance
Micron |
1μm, 5μm, 10μm, 15μm , 20μm, 40μm, 70μm |
Maximum operating temperature: |
82℃ |
Maximum operating differential pressure (Inside to outside flow direction) |
3.44bar@82℃ |
Suggestion pressure for filter replacement |
2.5Bar@20℃ |
Max. flow rate |
40": 70m3/h |
60": 110m3/h |
|
Filtration direction |
Inside to outside |