Vertical common mode choke with 6 windings and 3 color wire ( white blue red ), bifilar winding
Feature for High Quality toroidal inductor common mode choke ROHS :
High frequency and low loss
Common mode filter
Toroidal inductor
For excellent EMI suppressor
High-frequency, low loss toroid
Low resistance
MPP, hi-flux, sendust/RF carbonyl, and iron power core
For excellent EMI suppressor
common mode choke coils
Toroid common-mode filter coils
Toroidal common-mode inductor
For SMPS application
RoHS compatible (Pb free) versions available
Good frequency characteristic
With high impedance
Dielectric strength:1000V. Fixed pin spacing allow easy PCB insertion.
Custom Designs Available.
Application:
widely applied in various switching power suppliers and high frequency electronic equipmentNoise suppression of DC circuit for switching regulator.
DC/DC,AC/AC line noise suppression
Automotive System.
Communication System.
WINDING PARAMETER: | |||||||
NO. | WINDING | MATERIAL | S--F | TURNS | REMARK | ||
1 | PART1 | PVC #1332 24AWG WHITE | 12---11 | 15TS | BIFILAR | ||
2 | PVC #1332 24AWG BLUE | 10--9 | 15TS | ||||
3 | PVC #1332 24AWG RED | 1---2 | 9TS | ||||
4 | PART2 | PVC #1332 24AWG WHITE | 8--7 | 15TS | BIFILAR | ||
5 | PVC #1332 24AWG BLUE | 6---5 | 15TS | ||||
6 | PVC #1332 24AWG RED | 3--4 | 9TS |
ELECTRICAL CHARACTERISTIC: | |||||||
NO. | ITEM | MEASURE POINT | TECHNICAL DATA | TEST CONDITION | |||
1 | INDUCTANCE | PIN7--8/PIN9--10 | 300 uH MIN | 1KHz/0.3V CH-1061 | |||
2 | DCR | PIN7--8/PIN9--10 | 60 mΩ MAX | AT 25℃ | |||
3 | HI-POT | PIN 1,2,3,4---7,8,9,10,11,12 | 1000Vac | 5mA 60SEC |
MATERIAL LIST: | |||||||
NO. | MATERIAL NAME | MATERIAL SPEC. | PROVIDER | UL·NO | |||
1 | CORE | FERRITE CORE T22*14*8+C | TDG OR EQUIVALENT | ||||
2 | CASE | PBT UL94V-0 | CHANGCHUN OR EQUIVALENT | E59481 | |||
3 | WIRE | PVC #1332 24AWG 200℃ | SAS ELECTRONIC OR EQUIVALENT | E211048 | |||
4 | GLUE | 910A/B | JIAGANG OR EQUIVALENT | E213711 | |||
5 | TAPE | MYLAR 130℃ | E I DOPUNT EQUIVALENT | E41938 |
General information:
It is recommended that the temperature of the part does not exceed +125°C under worst case conditions.
Storage Temperature: -40°C to 85°C
Operating Temperature: -40°C to 125°C
Test conditions of Electrical Properties: 20°C, 33% RH if not specified differently
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT | |||||
Temperature range | Humidity range | Standard test conditions | |||
Operating temperature* | Storage temperature | Operating temperature** | Storage temperature** | Operating temperature** | Storage temperature** |
( ℃) | ( ℃) | ( % RH) | ( % RH) | ( ℃) | ( % RH) |
-30 to +120 | -40 to +80 | 10 to +95 | 10 to +95 | 25 ± 10 | 25 to +75 |
* With self-heating
** Maximum wet-bulb temperature 38°C, without dewing
*** Without dewing