EQ series EQ30 led lighting transformer 96W big power high current small size for high level lighting size
Products Name: | High frequency lighting transformers |
Product Description: | |
Characteristics: | High operating frequency, |
high efficiency, | |
small volume, light weight | |
Applications: | Telecom electronics, |
LED lighting, lighting tubes | |
Consumer electronics, | |
Smart appliances, etc | |
Certifications: | UL,VDE,3C,CE |
Parameters: | Input voltage:85V-265VAC, 50/60Hz |
output voltage: 4VDC-24VDC | |
Power: 1000W max |
Features
1. Custom design available
2. High reliability
3. Low height and big power, suitable for led tube
4. High frequency and high current
5. We can offer design if needed
Quick Details
Place of Origin: Guangdong, China (Mainland)
Brand Name: Greenfair, GFE, GE
1, DCR within the given tolerance: We always use the AWG wires in order to assure that the DCR is within the given tolerance.
2, Low magnetizing current: The smoothness of the winding, appropriate lamination of core sheets and also the material quality ensures the magnetizing current will never exceed the allowed limit during unloaded operation.
3, High efficiency: We always choose thin and silver-colored core sheets in order to keep the efficiency high.
4, The transformers never overheat: Appropriate bobbin size, the diameter of the wire we use and precise alignment of the individual winding loops keep the component from overheating.
5, 100% Hi-Pot Testing: Every transformer we produce has to pass the Hi-Pot test and if necessary it can sustain 3,700 V coil to coil voltage and 1,500 V coil to core voltage.
2. ELECTRICAL CHARACTERSEIC: | ||||||||
No. | ITEM | MEASURED POINT | TECHNICAL DATA | REMARK | ||||
1 | INDUCTANCE | 1--2 | 1050uH±25% | At 10 KHz/0.4V by 1062 | ||||
2 | hi-pot | pri.--sec. | 3000V/AC | 1mA/1S by 2670 |
3. WINDING PARAMETER: | ||||||||
WINDING No. | MATERIAL SPEC. | Pin | TURNS | Winding | REMARK | |||
WD1 | TEX-ELZ φ0.3mm×7P | 2--1 | 15TS | Close | 9.5mm* 2TS tape | |||
WD2 | Litz φ0.1 mm*48 ×2P | 4--3 | 6TS | Close | 9.5mm* 2TS tape | |||
WD3 | Litz φ0.1 mm*48 ×2P | 6--5 | 6TS | Close | 9.5mm* 2TS tape |
General information:
It is recommended that the temperature of the part does not exceed +125°C under worst case conditions.
Storage Temperature: -40°C to 85°C
Operating Temperature: -40°C to 125°C
Test conditions of Electrical Properties: 20°C, 33% RH if not specified differently
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT | |||||
Temperature range | Humidity range | Standard test conditions | |||
Operating temperature* | Storage temperature | Operating temperature** | Storage temperature** | Operating temperature** | Storage temperature** |
( ℃) | ( ℃) | ( % RH) | ( % RH) | ( ℃) | ( % RH) |
-30 to +120 | -40 to +80 | 10 to +95 | 10 to +95 | 25 ± 10 | 25 to +75 |
* With self-heating
** Maximum wet-bulb temperature 38°C, without dewing
*** Without dewing