Features:

1. Suitable for making blank with complex shape, especially with complex inner cavity;

2. Wide adaptability and low cost;

3. For some materials with poor plasticity, such as cast iron, sand casting is the only forming process for manufacturing parts or blank.

Application:

automobile engine cylinder block, cylinder head, crankshaft and other castings

Features:

1. High pressure and fast flow rate of metal liquid during die casting

2. Good quality, stable size and good interchangeability;

3. High production efficiency and frequent use of die casting mold;

4. Suitable for mass production with good economic benefits.

Application:

automobile industry, instrument industry, agricultural machinery, machine tool industry, electronics industry, national defense industry, computer, medical equipment, clocks and watches, cameras and daily hardware and other industries.

Features:

1. The pressure and speed during pouring can be adjusted, so it can be applied to all kinds of different casting types (such as metal mold, sand mold, etc.), casting all kinds of alloys and castings of all sizes;

2. The bottom injection mold filling is adopted, and the metal liquid filling is stable without splash phenomenon, which can avoid gas and scour the mold wall and core and improve the qualified rate of the casting;

3. The casting crystallizes under pressure, and the casting has dense structure, clear contour, smooth surface and high mechanical properties, which are particularly favorable for the casting of large and thin wall parts;

4. The metal utilization rate can be increased to 90-98% by eliminating the feeding riser;

5. low labor intensity, good working conditions, simple equipment, easy to achieve mechanization and automation.

Application:

mainly based on traditional products (cylinder head, hub, cylinder frame, etc.)

Features:

1. The thermal conductivity and thermal capacity of the metal mold are large, the cooling speed is fast, the casting structure is dense, and the mechanical properties are about 15% higher than those of the sand mold casting.

2. Castings with higher dimensional accuracy and lower surface roughness can be obtained with good quality stability.

3. do not use or rarely use sand core, improve the environment, reduce dust and harmful gas, reduce labor intensity.

Application:
metal mold casting is not only suitable for mass production of complicated non-ferrous alloy castings such as aluminum alloy and magnesium alloy, but also suitable for production of iron and steel metal castings and ingots.