50MPa 38L/Min Explosion-Proof Motor High Pressure Water Jet Cleaning Machine
Parameters | |
Model | JR-5038 |
Pressure | 7250psi
|
Flow38 | 10.03gal/Min
|
Power | 37KW |
Speed | 1450r/Min
|
Voltage | 380V |
Size | 135*65*85cm |
Weight | 260kg |
During the use of the pressure washer, it is inevitable to have faults. When a problem occurs, locate the cause according to different symptoms.
1) The spray gun does not spray water
A) Water inlet and water filter are blocked. B) The nozzle is blocked. C) The heating spiral tube is blocked, and scale should be removed if necessary.
2) The outflow pressure is unstable
A) insufficient water supply. B) The air suction pipe is caused by pipe rupture or the cleaner suction nozzle is not inserted into the cleaner. C) Nozzle wear. D) High pressure water pump seal leakage.
3) The burner does not ignite and burn
A) insufficient air intake and white smoke. B) Fuel filter, fuel pump and fuel nozzle are dirty and blocked. D) Solenoid valve damage. E) The position of the ignition electrode changes, and the spark is too weak. F) The high voltage ignition coil is damaged. G) Pressure switch damage.