Melt blown Fabric For / Fabric / Non-woven Melt Blown / Polypropylene Slitting Macchine

Roll slitters have a variety of names such as:

log slitters
baloney slicers
bologna cutters
single knife roll slitters
A Roll Slitter uses a large circular blade or fixed band blade to cut all the way through a roll of material. This machine cuts down through the core the material was wound on.

The core of most master rolls is a 3″ (7.62cm) ID paper core. The master roll does not need to be unwound. You can skip a time-consuming process of aligning slitting blades and empty cores.

Rosenthal Roll Slitters are designed to operate in manual models. An operator positions and pulls the blade through the roll of material.

Detail description: suitable for cloth, Melt blown for , Non-woven fabric for slitting and rewinding.

Characteristics:
1. The two rewinding motors cooperate with the main motor to work as three motors motion control, the main motor blocks the unwinding and the rewinding motor control the tension, the tension of the finished product is stable, good rewinding appearance.
2. The rewinding arm adopts the pneumatic coupling control the balance, the contact pressure can be adjusted automatically during rewinding, the contact pressure can be set. This machine can also be equipped with discontinuous rewinding, cut other materials more widely.
3. The operation interface adopts LCD touch screen, various rewinding conditions and working conditions can be set directly on the screen, the control part adopts PLC to control the machine operation, with self-test system.
4. The machine drive uses AC motor and frequency inverter; acceleration and deceleration are stable and fast.
5. Optional with slat type air pressure shaft and pneumatic friction shaft, suitable for more material range, the shaft change is specially designed, can be change at any time.
6. Auxiliary discharge device, the material outfeed pass surface impression roll, material more even, and reduce the noise (suitable for adhesive material)
7. Separate type unwinding stand, for bigger unwinding diameter.