Multi- functional Upright Surface Centtral Rewinding Slitting Machine For 1000mm / 1300mm / 1600mm width (Fixed Shaft)

Detail description: suitable for release film slitting and rewinding.

Inspection Slitting Rewinding Machine is used majorly for checking of bad printed materials on Roto Gravure Printing, Flexo Printing Machine, Batch Printing on Doctoring Rewinding Machine, etc. In Inspection slitting rewinding process we allow optional parts like, Line Guide System for Electronic Edge Sensing for Perfect Winding, Air Shaft at Unwinder & Rewinder, Tension Control System for Auto Tension at Unwinder, Stroboscopic Equipment for Inspection with quick drying of Ink Slitting Arrangement and many more.

Characteristics:

1. The two rewinding motors cooperate with the main motor to work as three motors motion control, the main motor blocks the unwinding and the rewinding motor control the tension, the tension of the finished product is stable, good rewinding appearance.
2. The rewinding arm adopts the pneumatic coupling control the balance, the contact pressure can be adjusted automatically during rewinding, the contact pressure can be set. This machine can also be equipped with discontinuous rewinding, cut other materials more widely.
3. The operation interface adopts LCD touch screen, various rewinding conditions and working conditions can be set directly on the screen, the control part adopts PLC to control the machine operation, with self-test system.
4. The machine drive uses AC motor and frequency inverter; acceleration and deceleration are stable and fast.
5. Optional with slat type air pressure shaft and pneumatic friction shaft, suitable for more material range, the shaft change is specially designed, can be change at any time.
6. Auxiliary discharge device, the material outfeed pass surface impression roll, material more even, and reduce the noise (suitable for adhesive material)
7. Separate type unwinding stand, for bigger unwinding diameter.

Specification: