None-woven Melt blown cloth for / cloth/ Slitting Machine

Detail description: suitable for cloth, Melt blown for , Non-woven fabric for slitting and rewinding.

FABRIC SLITTING MACHINE

This machine is made of fabric steel structure in which the fabric let off, liner winding,Main spindle, Cutter Shaft and Finish Reel Units are assembled. The Structure is be of rigid type to with stand the load exerted by the drives.

The rubberized fabric let of unit consists of the let off shaft, the winding shaft for liner and web aligner.
The let off and liner winding shaft is of square type, (32 mm) easily removable shaft with safety chuck arrangement for loading and unloading the slitted rolls.

Characteristics:

1. The two rewinding motors cooperate with the main motor to work as three motors motion control, the main motor blocks the unwinding and the rewinding motor control the tension, the tension of the finished product is stable, good rewinding appearance.
2. The rewinding arm adopts the pneumatic coupling control the balance, the contact pressure can be adjusted automatically during rewinding, the contact pressure can be set. This machine can also be equipped with discontinuous rewinding, cut other materials more widely.
3. The operation interface adopts LCD touch screen, various rewinding conditions and working conditions can be set directly on the screen, the control part adopts PLC to control the machine operation, with self-test system.
4. The machine drive uses AC motor and frequency inverter; acceleration and deceleration are stable and fast.
5. Optional with slat type air pressure shaft and pneumatic friction shaft, suitable for more material range, the shaft change is specially designed, can be change at any time.
6. Auxiliary discharge device, the material outfeed pass surface impression roll, material more even, and reduce the noise (suitable for adhesive material)
7. Separate type unwinding stand, for bigger unwinding diameter.