DC-DC automatic voltage regulator, high current DC voltage regulator module 12V 5V
Product introduction:
The high power automatic lifting and lowering module can be boosted, the input voltage can be higher than the output voltage, and the output voltage is kept constant. The automatic voltage regulation function (such as the change between the input DC7-25V, can stabilize the output of 12V, and of course the power should conform to the law of conservation of energy). Using the iron silicon aluminum core inductor, high efficiency and low heat, the boost efficiency reaches 90%, the depressurization efficiency is 88%, the maximum input and output current 5A, the large dispersion heat slice, the shell and the top cover, the upper cover disassembled, the convenient and beautiful use. The input voltage is 6~35V, the output voltage is adjustable from 1.0~35V continuously.
Characteristic parameters:
input voltage | DC 6 ~ 35V, please do not reverse the positive or negative pole, otherwise it will be directly damaged. |
output voltage | DC 1 to 35V (Note: this board is an automatic lifting and pressing plate, the output voltage can be greater than the input voltage or less than the input voltage). |
conversion efficiency | 90% (input 12V output 19V/2.5A, the efficiency is related to the input voltage and output voltage and current). |
maximum input current | 7A (long time continuous work, please strengthen heat dissipation, and leave a certain allowance). |
maximum output current | 5A (long time continuous work, please strengthen heat dissipation, and leave a certain allowance). |
size | 70x39x32 mm (L* W*H) |
Note:
This module is a regulator module, without constant current function, can not output direct battery (the output can not be connected to the battery, to charge the battery), otherwise the current will be overloaded, overload damage.
There is no need to be calibrated.