150W boost module DC-DC mobile notebook mobile power 12-32V to 12-35V adjustable

Module parameters:

Module properties: non isolated boost module

Module size: L65MM*, H 23MM* (wide 56.5MM including heat sink).

Input mode: IN+ input positive level, IN- input negative

Output mode: OUT+ output positive stage, OUT- output negative pole

Connection mode: no welding, terminal

Input voltage: 12-32V

Output voltage: (1) continuously adjustable (12-35V) our store's default delivery voltage is

(2) fixed output (arbitrary selection between 12-35V)

Output current: 6A (MAX)

Input current: 10 (MAX) (over 10A, please reduce heat dissipation).

Output power: natural cooling 100W (MAX), plus fan 150.(MAX)

Easy drive 65W 90W notebook computer including dual core

The temperature of laptop module with 12V 19V battery and ordinary 3.42A 3.42A is about 45 degrees.

Conversion efficiency: 94% (input 16V output 19V 2.5A measured) (for reference only)

Working temperature: industrial grade (-40 C to +85 C) (ambient temperature exceeds 40 degrees, please reduce power usage or add fan). Full load temperature rise: 45 degrees centigrade

No-load current: typical 25mA

Short circuit protection: no (please input overcurrent protector)

Input reverse connection protection: none, input diode in series.

Weight: 70G

Application scope

1) DIY an output adjustable vehicle power supply, only need to access your 12V power input, the output voltage you can (14-35V) free continuous adjustment, but the output voltage can not be lower than the input voltage.

2) universal vehicle notebook power supply. The input is connected to your 12V power, and the output is adjusted to the voltage of your notebook to work.

3) boost charger, you can use 12V power to charge 12V battery, such as 24V battery.

4) power supply for your electronic equipment, as long as the voltage is regulated to the voltage you need and the current does not exceed the rated current, it can work normally.

5) system before the power supply, when you are doing a project when you input 10-18V, and your system board needs about 24V power and its power is very high, the power of the common DC-DC module is too small, you choose this module will be your best choice, do not need to debug straight on the machine can work, easy to be efficient High power boost