DC Power Source With UL / illuminated sign box Led Power Supply 12 Volt DC Driver Transformer
Parameter:
model | output | Load regulation | ripple | efficiency | |
GTK-250-15 | 15V | 16A | 0.5% | 100mA | 78% |
GTK-250-24 | 24V | 10A | 0.5% | 100mV | 78% |
GTK-250-27 | 27V | 9.2A | 0.5% | 100mA | 78% |
GTK-250-36 | 36V | 7A | 0.5% | 120mA | 80% |
GTK-250-48 | 48V | 5.6A | 0.5% | 130mA | 80% |
Input Voltage Range: | 90~250VAC0 |
Frequency: | 47 / 60Hz |
Set up time, Rise time, Hold-up time: | 50ms(typical value) |
Ripple and Noise Test Condition : | <120 mVp-p |
Over current protection: | 110%-150% |
Environment | |
operating temperature | -10℃~+50℃ |
Working Humidity: | 20%~85% RH non-condensing |
Storage Temp. & Humidity: | -20℃~85℃, 10%~95% RH |
Reliability | |
Hi-Pot Testing Voltage : | I/P-O/P: 3KVAC, I/P-FG:1.5KVAC;O/P-FG:0.5KVAC 1min |
Safety Standard : | GB4943 UL60950 EN60950 |
EMC Standard : | GB9254 EN55022A |
Size: | L199* (W)98 * (H)42mm |
mean time between failures | >50.000hours |
heat-dissipating method | self cooling |
200W Switch Mode Power Supply with 5V 12V 15V 24V 48V Constant Voltage
The main advantage of the switching power supply is greater efficiency than linear regulators because the switching transistor dissipates little power when acting as a switch.
Other advantages include smaller size and lighter weight from the elimination of heavy line-frequency transformers, and comparable heat generation. Standby power loss is often much less than transformers.
Features :
• AC input range selectable by switch
• Protections:Short circuit / Over load / Over voltage
• Cooling by free air convection
• 100% full load burn-in test
• Fixed switching frequency at 83KHz