Waterproof Constant Current Switching Power Supply/DC Switching Power Supply Single Output 50W
Parameter:
Input Voltage Range: | 90~250VAC0 | |||||
Frequency: | 47 / 60Hz | |||||
Set up time, Rise time, Hold-up time: | 50ms(typical value) | |||||
Ripple and Noise Test Condition : | <120 mVp-p | |||||
Over current protection: | 110%-150% | |||||
Environment | ||||||
operating temperature | -10℃~+50℃ | |||||
Working Humidity: | 20%~85% RH non-condensing | |||||
Storage Temp. & Humidity: | -20℃~85℃, 10%~95% RH | |||||
Reliability | ||||||
Hi-Pot Testing Voltage : | I/P-O/P: 3KVAC, I/P-FG:1.5KVAC;O/P-FG:0.5KVAC 1min | |||||
Safety Standard : | GB4943 UL60950 EN60950 | |||||
EMI Standard : | EN55022B GB9254 | |||||
Size: | L159* (W)98 * (H)42mm | |||||
mean time between failures | >50.000hours | |||||
heat-dissipating method | self cooling | |||||
model | output | Load regulation | ripple | efficiency | ||
GTK-50-3.5 | 3.5V | 10A | 1.0% | 70mA | 71% | |
GTK-50-5 | 5V | 10A | 1.0% | 70mA | 72% | |
GTK-50-9 | 9V | 5.5A | 0.5% | 80mA | 77% | |
GTK-50-12 | 12V | 4.2A | 0.5% | 80mA | 77% | |
GTK-50-15 | 15V | 3.5A | 0.5% | 80mA | 77% | |
GTK-50-24 | 24V | 2.1A | 0.5% | 100mA | 82% | |
GTK-50-36 | 36V | 1.5A | 0.5% | 100mA | 82% | |
GTK-50-48 | 48V | 1A | 0.5% | 120mA | 83% |
Features:
1) Low price and high reliability
2) 105ºC output capacitor
3) AC input power suitable for the whole world
4) High efficiently and low operation temperature
5) Soft-start current can reduce the AC input impact efficiently
6) with short-circuit and overload protection
7) Compact size, light weight
8) 100% full-load burning test
9) Installed with EMI filter, minimum wave
The installation of power supply
Please use the appropriate screw, fixed the power supply to the right environment, screw length should be less than 6 mm, not to the circuit boards, conductive danger to avoid touching the internal components. Power supply working space should have ventilation channel or exhaust equipment;In order to ensure the safety of using and reduce interference, please ensure that the grounding line should be good grounding, grounding line is greater than the AWGI#. After the installation, please measure the shell with the input, the output, insulation resistance in order to avoid electric shock.