CZ Purlin Machine Roll Forming Machine for Construction Material

c z purlin roll forming machine has now become an indispensable equipment for construction of I-beam and channel steel in tunnels, subway, hydropower stations, underground caverns, etc

c z purlin roll forming machine features:

1.Upgraded version of CZ integrator, fast transformation; 1-2 minutes transformation of 2.specifications and CZ

3.Realization of Automatic Conversion of CZ Specification

4.Realize CZ automatic flip 180 degrees

c z purlin roll forming machine technical parameters:

1. Spindle material: 45# steel quenching and tempering treatment, outer diameter Φ80mm

2, roll material:

1) Cr12 chrome steel quenching treatment HRC60-62 ° (optional)

2) GCR15 bearing steel quenching treatment HRC58-60°

3, the number of leveling rolls: 5 roll leveling

4, the number of main rolls: 15 rows (3 rows of leveling 12 rows of molding)

5, the main motor power: 11KW

6, rolling speed: 8-12 m / min

7. Cutting system: It adopts advanced hydraulic drive and automatically cuts the length after forming. Invariable, no waste, high safety factor. (The host stops cutting)

8. Punching: hole type drawing, can be adjusted freely before and after any setting

9, blade, punch material: Cr12, quenching treatment 60-62 °

10, electronic control system: the whole machine uses PLC, inverter control, rotation straightening

11, the size of the host: about 10.5M × 1.7M wide × 1.2M high

c z interchangeable purlin roll forming machine charging:

1) Manual discharge rack, inner tension type, loading inner diameter 450mm--600mm, width ≤600mm, maximum loading weight 4000KG

2) Automatic inner tensioning and discharging rack width ≤600mm, Width <= 600mm, maximum loading weight: 7000KG

Hydraulic power: 3KW

Cylinder diameter: 120mm, working pressure: 10Mpa

Technical Parameters:

Welcome to send us your profile drawing.

Machine parameters:

1. Pre-cutting :
Cutting type: hydraulic, connect with the punching hydraulic unit
Cutting power by hydraulic, 5.5KW AC motor
Hydraulic working pressure: 12-16Mpa
Feeding of the last cut profile from the equipment: automatic if the length of the last profile is not less than 1500 mm
Cutting motion: The roll forming part is NON-stop when cutting
Material of blade:Cr12 with heat treatment
Length measuring: Automatic encoder length measuring, brand: Omron
Tolerance of length: +/- 1.5mm each piece end product


2. Forming section:
Thickness range: 1.5-3.0mm
Maximum production speed: not less than 10 meters per minute (for non-perforated profiles, excluding cutting)
Main motor power:4kw, AC motor, motor inside of main machine
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station: 20 stations
Roller material:ASTM52100 chrome plated surface with hardness 58-62 degree ,CNC,
Shaft diameter: 76mm material: SAE1045 with quenching and tempering
Transmission: by gear box for each station

Advantage:
- In order to keep the product shape and precision, cast iron structure, motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment.
- The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.