1.5-2.0mm Perforated Cable Tray Roll Forming Machine CT600X90 / 500X90 / 300X90

1) This cable tray roll forming machine adopt coil production material to form CT600X90 / 500X90 / 300X90 cable tray Profiles through 5 Ton hydraulic decoiler, Leveling, Servo feeding, Hydraulic Punching Machine, Main roll forming part, Post-cutting, hydraulic station, PLC control system and Non-power type support table.

2) The whole machine adopt PLC control, AC speed control by frequency inverter technology, to realize continuous auto production, which is the best desired machinery in steel structure and metal cold roll forming machinery industry.

3) Working Speed: about 0-15 m/min ( excluding punching & cutting time);

3 .Main roll forming machine

4 .Hydraulic cutting system

Material of Cutting Knife:

Cr12Mov, Quench HRC58-62
Hydraulic Station Power: 7.5KW

The whole machine is controlled by industry computer-PLC.
Adjust the height by the motors and the rails, controlled by the PLC

Some design of Cable Tray and Simple Flow

Control panel

(1) Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requestment)
(2) Length & quantity measurement automatically;
(3) Length & quantity controlled by PLC
(4) Length inaccuracy can be amended easily.
(5)Control panel: Button-type switch and touch screen
(6) The language in the touch screen: English and Chinese
(7) Unit of length: millimeter (switched on the control panel)

Our service

1. Designing:After order confirmation, we start to design the machine, such as the basement, structure, rollers, shafts, power, cutting device, programs and so on.

2 . Making:The main parts, like rollers and shafts are produced by ourselves. We have several high-precision CNC lathe and other kinds of new machine tools, so that the quality and precision can be controlled.

3 . Assembling:The machines are assembled by technicians with years of experience, which can help workers improve the production efficiency and machine’s quality.

4. Testing:Raw material of different specifications are prepared for testing. And during test, long enough material is used. Because if the material is not long enough, some defects can not be exposed.

5 . Delivery:Machine will be fixed inside container by steel wire, in order to make sure it won’t move during transportation and avoid any kinds of damage of machine and container.