HW-222C02M11-1100-2324SS:
The CMM has been developed for the aerospace,avionics,instrumentation & control,defence and transportation markets,with applications that induce IFES,HUDs,fight controls,FADEC units,radars,missiles, electro-optical sighting systems,satellites,mobile radios,power supplies,UAVs and engine controls.It is also used engine controls.It is also used in a growing number of medical,and telecom applications, pecializes in the design,development and manufacture of electronic connectors.
Part numbering:
Type | L |
S | 24-28 |
C | 22 |
FIXING HARDWARE FOR CMM 220 FEMALE
REFERENC | ASSEMBLY ON PCB | OVERALL DIMENSIONS | RECOMMENDATION |
M11 | | | M11 : |
MALE STRAIGHT ON CABLE P/N 30-33xx (solder or crimp):
Loaded | Unloaded | Ampere | Cable A | ØB | ØC | Length D hole | Length E body | Length F conductor | Solder | Crimp by HX3 Hexagone size/Dies | Crimp by AF8 | ||||
AWG 20 | AWG 18 | AWG 16 | AWG 14 | AWG 12 | |||||||||||
3305 | 30-3305 | 5A | × | 1,1mm | 1,65 | 6,2mm | 6,7mm | 4,5mm | OK | Hex.1,9 mm/C14923 | OK | ||||
3308 | 30-3308 | 8A | × | 1,35mm | 1,85 | 6,2mm | 6,7mm | 4,5mm | OK | Hex.1,9 mm/C14923 | OK | ||||
3310 | 30-3310 | 10A | × | × | × | 1,7mm | 6,2mm | 6,7mm | 6mm | OK | OK | ||||
3315 | 30-3315 | 15A | × | 2mm | 6,2mm | 6,7mm | 6mm | OK | OK | ||||||
3320 | 30-3320 | 20A | × | 2,6mm | 6,2mm | 6,7mm | 5,3mm | OK | OK |
Materials and coating:
Materials and coating | |
Insulating medium | Glass fiber reinforced PPS, UL94-V0 Radiation resistant, non hygroscopic, ozone resistant |
Contact | Copper alloy nickel base plating |
Enclosure | stainless steel |
Electrical performance index | |
Voltage withstand test (sea level) | 800V AC/DC |
Insulation resistance | ≥1000MΩ |
Rated current | LF contact: working current 25 C, ≤ 3A; Working current 85 C, ≤ 2.2A; contact resistance ≤10mΩ |
Mechanical performance index | |
Mechanical life | 500 times of plugging and unplugging |
Environmental performance index | |
Operating ambient temperature | -55℃ to 125℃ |
1. The contacts are distributed, and it is recommended to crimp the AWG22 wire for LF contacts;
2. After LF contact is pressed into the base with special tools, it is recommended to use the heat shrinkable sleeve
shrinks
its tail and fills the base cavity with glue;
Product details:
Product display: